~~NOTOC~~ > #@IC_HTML@# user manual > Settings > Settings ====== Import ====== ---- > **Available in**\\ program version 1.3 and onwards In the “Import” tab of the “Settings” menu, you can adjust the general stamp settings. Click lower down the window on * **Apply** to save the changes without closing the window, * on **OK,** to save the changes and close the window or * on **Cancel,** to discard the changes. The settings will be saved for all projects. > **Note** In some circumstances, your CAQ system provider or administrator may prohibit changes to certain settings. If an incorrect setting disrupts your workflow, please contact the provider or administrator. \\ //**__Content__**//  • [[en:infra-convert:user:config:import#Access function]]\\  • [[en:infra-convert:user:config:import#“Common” group]]\\  • [[en:infra-convert:user:config:import#“DXF and DWG drawing files” group]]\\  • [[en:infra-convert:user:config:import#“PDF drawing files” group]]\\  • [[en:infra-convert:user:config:import#“infra - CONVERT project file (*.icp)“ group]] \\ ==== Access function ==== The menu can be accessed as follows:  **Menu bar** Click on **Edit** and **Settings** in the drop-down menu that opens. This will open the “Settings” menu window. Select the **Import** tab in the list on the left-hand side of the window. \\ ==== “Common” group ==== > **Note** Available from program version 1.3.9.10. Up to program version 2.4.1 the group is called "Font replacement". |< 100% 8% 22% 55% 15%>| ^ Field ^^ Description ^ Default setting ^ ^ {{ :en:infra-convert:user:functions:icon_steuerelement_kontrollkaestchen.png?nolink&0x50 |}} ^ Do not show notifications | Do not display any messages in the import dialogue.\\ \\ **Note** Up to programme version 2.6.9, this setting suppressed the "Missing Fonts" dialogue. | {{ :en:infra-convert:user:functions:icon_steuerelement_kontrollkaestchen_0.png?nolink&0x50 |}} | ^ {{ :en:infra-convert:user:functions:icon_steuerelement_kontrollkaestchen.png?nolink&0x50 |}} ^ Explode large groups of drawing elements automatically | Automatically explode groups of drawing elements when importing DXF, DWG and IGES files. This makes stamping easier by reducing the need for manual exploding.\\ \\ **Note** Available from program version 2.4.1 and only in the Pro version. | {{ :en:infra-convert:user:functions:icon_steuerelement_kontrollkaestchen_1.png?nolink&0x50 |}} | \\ ==== “DXF and DWG drawing files” group ==== > **Note** Available from program version 1.4.0.2. |< 100% 8% 22% 55% 15%>| ^ Field ^^ Description ^ Default setting ^ ^ {{ :en:infra-convert:user:functions:icon_steuerelement_dropdown-listenfeld.png?nolink&0x50 |}} ^ Behaviour when importing multi-page PDF files: | Specify whether the import dialog is opened when importing drawing files in PDF format or whether all pages are to be imported directly. | Always ask before importing | \\ ==== “PDF drawing files” group ==== |< 100% 8% 22% 55% 15%>| ^ {{ :en:infra-convert:user:functions:icon_steuerelement_dropdown-listenfeld.png?nolink&0x50 |}} ^ Behaviour when importing DXF and DWG files: | Specify whether to open the Import dialog when importing drawing files in DXF or DWG format, or to import sheets directly from specific areas. | Always ask before importing | ^ {{ :en:infra-convert:user:functions:icon_steuerelement_kontrollkaestchen.png?nolink&0x50 |}} ^ Import PDF as raster graphics | Specify that a PDF is converted to a raster graphic when imported. | {{ :de:infra-convert:user:functions:icon_steuerelement_kontrollkaestchen_0.png?nolink&0x50 |}} | ^ {{ :en:infra-convert:user:functions:icon_steuerelement_dropdown-listenfeld.png?nolink&0x50 |}} ^ DPI | Resolution or dot density of the raster graphics to be created in dpi. | 150 | ^ {{ :en:infra-convert:user:functions:icon_steuerelement_dropdown-listenfeld.png?nolink&0x50 |}} ^ Color depth | Color mode and color depth of the raster graphics to be created. | Color (24 Bit) | \\ ==== “infra - CONVERT project file (*.icp)“ group ==== |< 100% 8% 22% 55% 15%>| ^ {{ :en:infra-convert:user:functions:icon_steuerelement_kontrollkaestchen.png?nolink&0x50 |}} ^ Remove trailing zeros after the decimal place | Concerns the numerical values of the Nominal dimension, Upper tolerance and Lower tolerance characteristic properties. Specify that zeros are removed after the decimal point and after the last non-zero digit. Example: 0.010 becomes 0.01\\ \\ **Note** Available from program version 3.2.4 | {{ :en:infra-convert:user:functions:icon_steuerelement_kontrollkaestchen_1.png?nolink&0x50 |}} | > **Note** From program version 2, the following settings can only be made in administrator mode. Start #@IC_HTML@# with administrative rights. |< 100% 8% 22% 55% 15%>| ^ Field ^^ Description ^ Default setting ^ ^ {{ :en:infra-convert:user:functions:icon_steuerelement_eingabefeld.png?nolink&0x50 |}} ^ ID for characteristic type (ICP) | ID of the type of characteristic to be replaced (also described as “characteristic type”), as stipulated in #@IC_OLD_HTML@#. | 0\\ 1 | ^ {{ :en:infra-convert:user:functions:icon_steuerelement_dropdown-listenfeld.png?nolink&0x50 |}} ^ Category | →[[en:infra-convert:user:terms#Category (characteristic-)|Category]] to be assigned. | ICP-ID 0: Common Characteristic\\ ICP-ID 2: Special Characteristic | ^ {{:en:infra-convert:user:interface:icon_pruefplan_loeschen.png?nolink&30|}} ^ Delete | Delete the line in question, together with its assignments, by clicking on the interface. | – | ^ {{:en:infra-convert:user:interface:icon_neue_pruefplanversion.png?nolink&30|}} ^ Add | Add a new line, together with its assignments, by clicking on the interface. | – | ^ Tag for ID (characteristic): ... |||| ^ {{ :en:infra-convert:user:functions:icon_steuerelement_kontrollkaestchen.png?nolink&0x50 |}} ^ Tag 1\\ tag 2\\ ... | Tags to be assigned. | {{ :en:infra-convert:user:functions:icon_steuerelement_kontrollkaestchen_0.png?nolink&0x50 |}} | \\ ---- **Scroll backwards**\\ Settings > Settings > [[en:infra-convert:user:config:stamps|Stamp]] **Scroll forwards**\\ Settings > Settings > [[en:infra-convert:user:config:export|Export]]