ELIAS GmbH
Produktdokumentationen

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
~~NOTOC~~

<WRAP noprint>

> User manual #@IC_HTML@# > More

</WRAP>

====== Create and customize Excel templates ======

----

#@IC_HTML@# allows you to export the contents of a test plan directly into a Microsoft Excel workbook. All you need is an excel template file (.XLT) formatted as described below and Microsoft Excel on the computer on which the export is performed. Using the template, #@IC_HTML@# creates an Excel file (.XLSX, more file formats coming soon) with the test plan parameters you specify.

{{ :en:infra-convert:user:interface:excel-export_workflow.png?direct&300 |}}

\\ 

<WRAP group>
<WRAP column 40%>

The supplied test report templates are installed by default in the location opposite.

</WRAP>
<WRAP column 55%>

<code>
%ProgramData%/ELIAS GmbH/infra-Convert/ExcelReports
</code>

</WRAP>
</WRAP>

Excel templates can be set up and formatted according to your wishes. You can customize the templates provided or create new templates. Place the templates in the folder named //ExcelReports// above. When exporting test plans, these templates are available, see Functions > Export > [[en:infra-convert:user:functions:cplanexport#arbeitsablauf|Export test plan]] > Step 2d.

> **Important** Only one worksheet of #@IC_HTML@# can be filled. The position of the sheet in the workbook is irrelevant, but it must be active respectively visible when the template file is saved.

#@IC_HTML@# writes the inspection characteristics line by line, this means among themselves. Name the first cell in the column to be filled with a value with one of the variables from the table below. How to define names in Excel is described in Microsoft Office Help here: [[https://support.office.com/en-us/article/define-and-use-names-in-formulas-4d0f13ac-53b7-422e-afd2-abd7ff379c64|Defining and Using Names in Formulas]].

> **Important** Each name can only be assigned once.

{{ :en:infra-convert:user:interface:excel-pruefbericht_erstellen.png?direct&800 |}}

\\ 

Various variables are available to describe the inspection characteristics with their properties.

|< 100% 20% 40% 40% >|
^  Name  ^  Description  ^  Reference  ^
^ StampText | Stamp inscription | More > Terms > [[en:infra-convert:user:terms#stamp_stamps|Stamp/stamps]] |
^ CharacteristicId | Unique GUID for the feature\\ (Available as of program version 1.3.4.1) |  |
^ Requirement | Complete requirement, individually formattable for each feature class. | Administrator's Manual > Configuration and Import > Parameter file "CharacteristicClasses" > [[en:infra-convert:dev:characteristicclasses#Formatting the export variable "Requirement"|Formatting the export variable "Requirement"]] |
^ Value | Value\\ (Available as of program version 1.3.4.1) | User interface > Function window > [[en:infra-convert:user:interface:feature|Characteristic properties]] |
^ NominalValue | Value of the nominal value* | More > Terms > [[en:infra-convert:user:terms#measurement_sizes|Measurement (sizes-)]] |
^ UpperTolerance | Upper Tolerance* | More > Terms > [[en:infra-convert:user:terms#measurement_sizes|Measurement (sizes-)]] |
^ LowerTolerance | Lower Tolerance* | More > Terms > [[en:infra-convert:user:terms#measurement_sizes|Measurement (sizes-)]] |
^ UpperLimit | Upper limit value/maximum value, calculated from the nominal value and lower tolerance / upper deviation limit when exporting*\\ (Available as of program version 1.3.4.1) |  |
^ LowerLimit | Lower limit value/minimum value, calculated from the nominal value and upper tolerance / lower deviation limit when exporting*\\ (Available as of program version 1.3.4.1) |  |
^ CharacteristicType | Characteristic type (variabele, attributive) | More > Terms > [[en:infra-convert:user:terms#en:infra-convert:user:terms#characteristic_test-_quality|Characteristic (test-, quality-)]] |
^ CharacteristicTypeId | Characteristic type ID (1 = Variabele; 0 = Attributive)\\ (Available as of program version 1.3.4.1) | More > Terms > [[http://wiki.elias-gmbh.de/doku.php?id=en:infra-convert:user:terms#class_characteristic|Class (characteristic-)]] |
^ Class | Characteristic class | More > Terms > [[en:infra-convert:user:terms#en:infra-convert:user:terms#class_characteristic|Class (characteristic-)]] |
^ CharacteristicClassId | ID ("ELIAS-ID") der Merkmalklasse\\ (Available as of program version 1.3.4.1) | More > Terms > [[http://wiki.elias-gmbh.de/doku.php?id=en:infra-convert:user:terms#class_characteristic|Class (characteristic-)]] |
^ Fit | Tolerance class (specifiction of fits) | More > Terms > [[en:infra-convert:user:terms#tolerance_table|Tolerance table]] |
^ Comment | Comment | User interface > Function window > [[en:infra-convert:user:interface:feature|Characteristic properties]] |
^ ToleranceTable | Tlolerance table | More > Terms > [[en:infra-convert:user:terms#Toleranztabelle|Toleranztabelle]] |
^ ToleranceTableColumn | Tolerance class in Tolerance table (column) | More > Terms > [[en:infra-convert:user:terms#Toleranztabelle|Toleranztabelle]] |
^ DrawingQuadrant | Field division | More > Terms > [[en:infra-convert:user:terms#drawing_sheet|Drawing sheet]] |
^ SpecialCategory | Category | More > Terms > [[en:infra-convert:user:terms#category_characteristic|Category (characteristic-)]] |
^ SpecialCategoryGuid | Category GUID\\ (Available as of program version 1.3.9.4) | More > [[en:infra-convert:user:terms#Kategorie (Merkmal-)|Kategorie (Merkmal-)]] |
^ Tags | Label/Tag | More > Terms > [[en:infra-convert:user:terms#label|Label]] |
^ DrawingSheet | File name of the drawing sheet including the file ending\\ (Available as of program version 1.3.4.1) |  |
^ PositionX | X-coordinate of the stamp in pixel\\ (Available as of program version 1.3.4.1) |
^ PositionY | Y-coordinate of the stamp in pixel\\ (Available as of program version 1.3.4.1) |
^ TargetX | X-coordinate of the reference point (target point, origin point) of the stamp in pixel\\ (Available as of program version 1.3.4.1) |
^ TargetY | Y-coordinate of the reference point (target point, origin point) of the stamp in pixel\\ (Available as of program version 1.3.4.1) |
^ Radius | Size of the stamp, indicated as radius in pixel\\ (Available as of program version 1.3.4.1) |
^ CharacteristicGraphic | File name of the stamp graphic including the file ending\\ (Available as of program version 1.3.4.1) |  |

* Nominal and tolerance values are output as a text string to match the representation in the specification on the drawing. If you want to continue calculating with the numeric values, it may be useful to convert the strings into numbers. You can use the Excel [[https://support.office.com/en-gb/article/wert-funktion-257d0108-07dc-437d-ae1c-bc2d3953d8c2|VALUE]] function for this.

<WRAP noprint>

----

<WRAP group>
<WRAP col2>

<WRAP rightalign>
**Go to previous page**\\ 
Export drawing from the CAD system > Siemens PLM > [[en:infra-convert:user:cadexp:solid_edge_2019|Solid Edge 2019]]
</WRAP>

**Go to next page**\\ 
More > [[en:infra-convert:user:collectdrw|Create test plans from a collective drawing]]

</WRAP>
</WRAP>

</WRAP>
ELIAS GmbHProduktdokumentationen

User Tools

Site Tools

Page Tools

ELIAS GmbH
Produktdokumentationen
