ELIAS GmbH
Produktdokumentationen

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
~~NOTOC~~

<WRAP noprint>

> Administrator’s Guide #@IC_HTML@# > Configuration and Import

</WRAP>

<WRAP group>
<WRAP column 90%>
====== Parameter file "CharacteristicClasses" ======

----
</WRAP>
<WRAP column 5%>
{{ :en:infra-convert:dev:icon_dev_klassen.png?nolink&50|}}
</WRAP>
</WRAP>

The →[[en:infra-convert:user:terms#Class (characteristic-)|characteristic classes]] that are available in #@IC_HTML@# are defined in the parameter file "CharacteristicClasses.json". More specifically: these definitions are loaded when a new →[[en:infra-convert:user:terms#Project|project]] is created and saved in the project file. This means that it is not possible to later change the class definitions for a project.

> **Important** Each class definition has parameters that cannot be changed. If a parameter is missing or faulty, then characteristics assigned to the corresponding class will no longer be recognized by the automatic stamp function. The same is, of course, true for missing definitions.

If you need additional classes, you can append definitions. You are welcome to tell us your wishes, as we are interested in offering the widest possible selection of classes.

During installation, the parameter file CharacteristicClasses is saved at the following location:

<WRAP group>
<WRAP indent>
<WRAP column 72%>
<code>%ProgramData%\ELIAS GmbH\infra-convert\JsonData\CharacteristicClasses.json</code>
</WRAP>
</WRAP> </WRAP>

If another parameter file is to be loaded when starting the program, this can be specified in the startup parameter file (see Configuration and Import > Startup parameter file > [[en:infra-convert:dev:parameter#Parameter file for characteristic classes]]).

{{page>en:infra-convert:dev:tip_use_adv_editor}}

<WRAP noprint>
<WRAP group>
<WRAP column 42%>
//**__Content__**//

 • [[en:infra-convert:dev:characteristicclasses#ID]]\\ 
 • [[en:infra-convert:dev:characteristicclasses#Parent class]]\\ 
 • [[en:infra-convert:dev:characteristicclasses#Friendly name]]\\ 
 • [[en:infra-convert:dev:characteristicclasses#Q-DAS class]]\\ 
 • [[en:infra-convert:dev:characteristicclasses#ELIAS ID]]\\ 
 • [[en:infra-convert:dev:characteristicclasses#Dimension unit]]\\ 
 • [[en:infra-convert:dev:characteristicclasses#Unit of the tolerance limits]]\\ 
 • [[en:infra-convert:dev:characteristicclasses#Characteristic type]]\\ 
 • [[en:infra-convert:dev:characteristicclasses#Group]]\\ 
 • [[en:infra-convert:dev:characteristicclasses#Formatting the export variable "Requirement"]]\\ 
 • [[en:infra-convert:dev:characteristicclasses#Display text]]\\ 
 • [[en:infra-convert:dev:characteristicclasses#Installation/Deinstallation]]

\\ 

</WRAP>
</WRAP> </WRAP>

===== ID =====

<WRAP group>
<WRAP column 40%>

Unique, internal identifier for the class.

<WRAP group>
<WRAP column 20%>
> {{:en:infra-convert:icon_hinweis_stop.png?nolink&50}}
</WRAP>
<WRAP column 65%>
Please do not delete these parameters or change their values.

When creating a class definition: Assign new value!
</WRAP>
</WRAP>

</WRAP>
<WRAP column 55%>

<code javascript>
"Id": "BEA94EBE-84DE-4653-86A5-DD600A45070E",
</code>

|< 100% 33% 12% 54% >|
^  Parameter  ^  Type  ^  Value/Content  ^
^ ID | String | GUID of the class |

</WRAP>
</WRAP>

\\ 

===== Parent class =====

<WRAP group>
<WRAP column 40%>

Reference to the parent class, if there is one.

<WRAP group>
<WRAP column 20%>
> {{:en:infra-convert:icon_hinweis_stop.png?nolink&50}}
</WRAP>
<WRAP column 65%>
Please do not delete these parameters or change their values.

When creating a class definition: assign empty string ("")!
</WRAP>
</WRAP>

</WRAP>
<WRAP column 55%>

<code javascript>
"ParentClass": "Diameter",
</code>

|< 100% 33% 12% 54% >|
^  Parameter  ^  Type  ^  Value/Content  ^
^ ParentClass | String | FriendlyName of the parent class, if there is one |

</WRAP>
</WRAP>

\\ 

===== Friendly name =====

<WRAP group>
<WRAP column 40%>

Unique, internal identifier for the class in the form of a “user-friendly name”.

<WRAP group>
<WRAP column 20%>
> {{:en:infra-convert:icon_hinweis_stop.png?nolink&50}}
</WRAP>
<WRAP column 65%>
Please do not delete these parameters or change their values.

When creating a class definition: Assign new value!
</WRAP>
</WRAP>

</WRAP>
<WRAP column 55%>

<code javascript>
"FriendlyName": "Linear",
</code>

|< 100% 33% 12% 54% >|
^  Parameter  ^  Type  ^  Value/Content  ^
^ FriendlyName | String | Unique identifier for the class as descriptive name |

</WRAP>
</WRAP>

\\ 

===== Q-DAS class =====

<WRAP group>
<WRAP column 40%>

Value of the Q-DAS characteristic size K2009.

<WRAP group>
<WRAP column 20%>
> {{:en:infra-convert:icon_hinweis_stop.png?nolink&50}}
</WRAP>
<WRAP column 65%>
Please do not delete these parameters or change their values.
</WRAP>
</WRAP>

> **See also**\\ Administrator’s Guide #@IC_HTML@# > Export > Quality test plan format DFD > [[en:infra-convert:dev:export:dfd#Converting the classes|Converting the classes]]\\ \\ User’s Guide #@IC_HTML@# > More > Terms > [[en:infra-convert:user:terms#Class (characteristic-)|Class (characteristic-)]] > ID

</WRAP>
<WRAP column 55%>

<code javascript>
"QdasClass": 200,
</code>

|< 100% 33% 12% 54% >|
^  Parameter  ^  Type  ^  Value/Content  ^
^ QdasClass | String | Value of the Q-DAS class. |

</WRAP>
</WRAP>

\\ 

===== ELIAS ID =====

<WRAP group>
<WRAP column 40%>

ID of the characteristic class, clearly assigned in  #@IC_OLD_HTML@# and  #@IC_HTML@#.

<WRAP group>
<WRAP column 20%>
> {{:en:infra-convert:icon_hinweis_stop.png?nolink&50}}
</WRAP>
<WRAP column 65%>
Please do not delete these parameters or change their values.

When creating a class definition: Assign the value "Undefined" (ID: -1)!
</WRAP>
</WRAP>

</WRAP>
<WRAP column 55%>

<code javascript>
"OldEliasId": 0,
</code>

|< 100% 33% 12% 54% >|
^  Parameter  ^  Type  ^  Value/Content  ^
^ OldEliasId | String | ID of the characteristic class |

</WRAP>
</WRAP>

\\ 

===== Dimension unit =====

<WRAP group>
<WRAP column 40%>

Unit of measurement assigned to the nominal size.

<WRAP group>
<WRAP column 20%>
> {{:en:infra-convert:icon_hinweis_bearbeiten_erlaubt.png?nolink&50}}
</WRAP>
<WRAP column 65%>
The listed values can be assigned for the parameter.
</WRAP>
</WRAP>

> **See also**\\ User Manual > More > Terms > [[en:infra-convert:user:terms#measurement_sizes|Measurement (sizes-)]]\\ \\ User Manual #@IC_HTML@# > More > Terms > [[en:infra-convert:user:terms#Class (characteristic-)|Class (characteristic-)]]

</WRAP>
<WRAP column 55%>

<code javascript>
"NominalUnit": "Millimeter",
</code>

|< 100% 33% 12% 54% >|
^  Parameter  ^  Type  ^  Value/Content  ^
^ NominalUnit | String | **None** No unit assigned\\ ID of the dimension unit, see User Manual > More > Terms > [[en:infra-convert:user:terms#measurement_sizes|Measurement (sizes-)]] |

</WRAP>
</WRAP>

\\ 

===== Unit of the tolerance limits =====

<WRAP group>
<WRAP column 40%>

Unit of measurement assigned to the tolerance limits.

<WRAP group>
<WRAP column 20%>
> {{:en:infra-convert:icon_hinweis_bearbeiten_erlaubt.png?nolink&50}}
</WRAP>
<WRAP column 65%>
The listed values can be assigned for the parameter.
</WRAP>
</WRAP>

> **See also**\\ User Manual > More > Terms > [[en:infra-convert:user:terms#measurement_sizes|Measurement (sizes-)]]\\ \\ User Manual #@IC_HTML@# > More > Terms > [[en:infra-convert:user:terms#Class (characteristic-)|Class (characteristic-)]]

</WRAP>
<WRAP column 55%>

<code javascript>
"ToleranceUnit": "Millimeter",
</code>

|< 100% 33% 12% 54% >|
^  Parameter  ^  Type  ^  Value/Content  ^
^ ToleranceUnit | String | **None** No unit assigned\\ ID of the dimension unit, see User Manual > More > Terms > [[en:infra-convert:user:terms#measurement_sizes|Measurement (sizes-)]] |

</WRAP>
</WRAP>

\\ 

===== Characteristic type =====

<WRAP group>
<WRAP column 40%>

Type of the characteristic.

<WRAP group>
<WRAP column 20%>
> {{:en:infra-convert:icon_hinweis_bearbeiten_erlaubt.png?nolink&50}}
</WRAP>
<WRAP column 65%>
The parameter can be specified optionally.
</WRAP>
</WRAP>

> **See also**\\ More > Terms > [[en:infra-convert:user:terms#characteristic_test-_quality|Characteristic (test-, quality-)]]\\ \\ User interface > Function windoww > Characteristic properties > [[en:infra-convert:user:interface:feature#properties|Properties]]

</WRAP>
<WRAP column 55%>

<code javascript>
"CharacteristicType": 2,
</code>

|< 100% 33% 12% 54% >|
^  Parameter  ^  Type  ^  Value/Content  ^
^ CharacteristicType | Integer | **1** Variable (Default, if parameter not assigned)\\ **2** Attributive |

</WRAP>
</WRAP>

\\ 

===== Group =====

<WRAP group>
<WRAP column 40%>

Internal parameter that governs various characteristic assignments, including the assignment of tolerance tables.

> **See also**\\ Administrator’s Guide #@IC_HTML@# > Configuration and Import > Tolerance tables > [[en:infra-convert:dev:toltab#Group]]

<WRAP group>
<WRAP column 20%>
> {{:en:infra-convert:icon_hinweis_stop.png?nolink&50}}
</WRAP>
<WRAP column 65%>
Please do not delete these parameters or change their values.
</WRAP>
</WRAP>

</WRAP>
<WRAP column 55%>

<code javascript>
"ClassGroup": "Length",
</code>

|< 100% 33% 12% 54% >|
^  Parameter  ^  Type  ^  Value/Content  ^
^ ClassGroup | String | Name of the group.\\ \\ **Undefined** No group assigned\\ **Length** Length\\ **Angle** Angle\\ **ChamferEdge** Chamfer\\ **Roundness** Roundness\\ **GeometricDimensioningTolerancing** Geometric tolerancing\\ **Roughness** Surface parameters |

</WRAP>
</WRAP>

\\ 

===== Formatting the export variable "Requirement" =====

<WRAP group>
<WRAP column 40%>

The variable "Requirement" is available for the direct export of a test plan to Excel. The structure of the variable depends on the feature class and is defined in this object.

> **See also**\\ User manual #@IC_HTML@# > More > [[en:infra-convert:user:exceltemp|Create and customize Excel templates]]

<WRAP group>
<WRAP column 20%>
> {{:en:infra-convert:icon_hinweis_bearbeiten_erlaubt.png?nolink&50}}
</WRAP>
<WRAP column 65%>
The listed values can be assigned for the parameter.
</WRAP>
</WRAP>

</WRAP>
<WRAP column 55%>

<code javascript>
"RequirementTemplate": "Rz{SPC} {N} {UT} {LT} {REP}",
</code>

|< 100% 33% 12% 54% >|
^  Parameter  ^  Type  ^  Value/Content  ^
^ RequirementTemplate | String | Sequence of variables, specified in curly brackets, and any intermediate characters. The variables are replaced by corresponding values. If no value is assigned to a variable in the specific case, the variable is omitted. Two or more consecutive spaces are replaced by a space.\\ \\ The following variables are available:\\ **CL** Characteristic class\\ **CLSY** Class symbol\\ **N** Nominal value\\ **UT** Upper tolerance value\\ **UT+** Upper tolerance value*, positive dimensions marked with a plus sign\\ **LT** Lower tolerance value\\ **LT+** Lower tolerance value*, positive dimensions marked with a plus sign\\ **F** Tolerance class\\ **M** Limit ("min."/"max.")\\ **TXT** Value\\ **REF** Reference*\\ **CON** Conditions/modificators\\ **C** comment\\ **REP** Number of repetitions in der form "(2x)", "(3x)" etc.\\ **SPC** Extra space (will not be deleted on duplication)\\ \\ Useful Unicode characters:\\ <html><font size="+2">⌀ □ ⌒ ◁ ⌳ ⌲</font></html>\\ <html><font size="+2">⏤ ⏥ ○ ⌭ ⌒ ⌓ ⫽ ⟂ ⦟ ⌖ ⭗ ⌯ ↗ ⌰</font></html>\\ \\ **Note * ** Available from programme version 2.2.7 |

</WRAP>
</WRAP>

\\ 

===== Display text =====

<WRAP group>
<WRAP column 40%>

Texts can be specified in this object, which are displayed in #@IC_HTML@# depending on the user language set.

<WRAP group>
<WRAP column 20%>
> {{:en:infra-convert:icon_hinweis_bearbeiten_erlaubt.png?nolink&50}}
</WRAP>
<WRAP column 65%>
The listed values can be assigned for the parameter.
</WRAP>
</WRAP>

</WRAP>
<WRAP column 55%>

<code javascript>
"LocalizedProperties": [
  {
    "Name": "Distance",
    "Description": "",
    "LanguageCode": "en"
  },
]
</code>

|< 100% 33% 12% 54% >|
^  Parameter  ^  Type  ^  Value/Content  ^
^ Name | String | Display name for the class |
^ Description | String | Description text |
^ LanguageCode | String | Language abbreviation as per ISO 639-1 |

</WRAP>
</WRAP>

\\ 

==== Installation/Deinstallation ====

The following describes the process for deinstalling, reinstalling (installing after previous deinstallation) and installing (without previous deinstallation) #@IC_HTML@# using the parameter file “CharacteristicClasses.json”. Essential preconditions are: the file is at the location where it was installed, and has not been renamed.

> **See also** Introduction > Overview (program version 2) > [[en:infra-convert:dev:intro_preview#installation_uninstallation|Installation/Uninstallation]]

<WRAP group>
<WRAP column 25%>

**Deinstallation**

</WRAP>

<WRAP column 65%>

The file is deleted.

</WRAP>
</WRAP>

<WRAP group>
<WRAP column 25%>

**Reinstallation**

</WRAP>

<WRAP column 65%>

An existing file is overwritten.

</WRAP>
</WRAP>

<WRAP group>
<WRAP column 25%>

**Installation**

</WRAP>

<WRAP column 65%>

An existing file is overwritten.

</WRAP>
</WRAP>

<WRAP noprint>

----

<WRAP group>
<WRAP col2>

<WRAP rightalign>

**Go to previous page**\\ 
Configuration and Import > [[en:infra-convert:dev:characteristictags|Parameter file “CharacteristicTags”]]

</WRAP>

**Go to next page**\\ 
Configuration and Import > [[en:infra-convert:dev:specialcategories|Parameter file “SpecialCategories”]]

</WRAP> </WRAP>

</WRAP>
ELIAS GmbHProduktdokumentationen

User Tools

Site Tools

Page Tools

ELIAS GmbH
Produktdokumentationen
