ELIAS GmbH
Produktdokumentationen

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
~~NOTOC~~

<WRAP noprint>

> #@IC_HTML@# Administrator’s guide > Configuration and Import

</WRAP>

<WRAP group>
<WRAP column 90%>
====== "UiAccess" Parameter file ======

----
</WRAP>
<WRAP column 5%>
{{ :en:infra-convert:dev:icon_dev_uiaccess_2.png?nolink&50|}}
</WRAP>
</WRAP>

> **Available from** program version 1.1.5 and onwards

The “UiAccess.json” parameter file stipulates which control elements are visible, hidden or disabled in the user interface.

The “UiAccess” parameter file is saved at the following location during installation:

<WRAP group>
<WRAP indent>
<WRAP column 72%>
<code>%ProgramData%/ELIAS GmbH/infra-convert/JsonData/UiAccess.json</code>
</WRAP>
</WRAP> </WRAP>

If another parameter file is to be loaded when starting the program, this can be specified in the startup parameter file (see Configuration and Import > [[en:infra-convert:dev:parameter#Parameter file for showing/hiding/locking control elements]]).

\\ 

<WRAP noprint>
<WRAP group>
<WRAP column 30%>
//**__Content__**//

 • [[en:infra-convert:dev:uiaccess#Administrator tools]]\\ 
 • [[en:infra-convert:dev:uiaccess#Element name]]\\ 
 • [[en:infra-convert:dev:uiaccess#Status]]

\\ 

</WRAP>
</WRAP>

</WRAP>

===== Administrator tools =====

<WRAP group>
<WRAP column 25%>

**Export file with default values**

</WRAP>

<WRAP column 65%>

You can export a complete "UiAccess.json" with default settings from the #@IC_HTML@# user interface in administrator mode.\\ **See** User Manual > Settings > Setup > Administration > [[en:infra-convert:user:config:export#export_configuration_files_group|“Export configuration files” group]]. (Available from program version 2.2.3)

</WRAP>
</WRAP>

<WRAP group>
<WRAP column 25%>

**Customise and export UiAccess parameters in the user interface**

</WRAP>

<WRAP column 65%>

You can affect UiAccess parameters directly in administrator mode and save the result. To do this, start #@IC_HTML@# in administrator mode and click **Edit UIAccess (Admin)** under **Help** in the menu bar. In the dialogue that opens, you can browse all available UiAccess parameters and change the status. Click **OK** or **Apply** to set the result for the current programme call. Click **Save** to save the result for all users. The UiAccess.json is written to the ProgramData directory for this purpose. (Available from program version 2.5.0)

</WRAP>
</WRAP>

\\ 

===== Element name =====

<WRAP group>
<WRAP column 40%>

Identifier of control element to be affected.

</WRAP>
<WRAP column 55%>

<code javascript>
"AffectedElementName": "NewProject",
</code>

|< 100% 23% 12% 65% >|
^  Parameter  ^  Type  ^  Value/Content  ^
^ AffectedElementName | String | __“File” (menu bar) and toolbar__\\ **NewProject**”File > New project”; “New project”\\ **OpenProject** ”File > Open project”; “Open project”\\ **SaveProject** ”File > Save project”; “Save project”\\ **SaveProjectAs** ”File > Save project as“\\ **CloseProject** ”File > Close project”\\ **CloseApplication** ”File > Close”\\ \\ __Toolbar__\\ **StampTool** ”Stamp tool”\\ **TagTool** ”Tag tool”\\ **EditLayersTool** Show/hide layers + Edit layers (from programme version 2.8.0)\\ **GridTool** ”Tool for defining division of field”\\ **EditFiltersTool** Filter characteristics + Edit characteristic filter (ab Programmversion 2.8.0)\\ **HideStampedCharacteristicsTool** "Hide stamped drawing elements"\\ \\ __Toolbar (Drawing comparison only)__\\ **TransferTool** ”Transfer characteristics”\\ \\ __“Edit” (menu bar)__\\ ** ProgramSettingGeneral** ”Settings > General”\\ **ProgramSettingCharacteristics**  \\ “Settings > Characteristics”\\ **ProgramSettingStamp** ”Settings > Stamp”\\ **ProgramSettingImport** ”Settings > Import”\\ **ProgramSettingExport** "Settings > Export“\\ **ProjectSettingsTolerance** ”Project settings > Tolerance tables”\\ **ProjectSettingsTags** ”Project settings > Tags“\\ **ProjectSettingsCategories** ”Project settings > Categories”\\ **ProjectSettingsTemplates** ”Project settings > Stamp templates”\\ **LicenseDialog** "Help > Show License" (from program version 1.5.3.0)\\ **LicenseDialogAddLicense** "Help > Show License > Load license" (from program version 1.5.3.0)\\ **LicenseDialogLicenseServerSetting** "Help > Show License > License server (from program version 1.5.3.0)\\ **LicenseDialogRequestLicense** "Help > Show License > Request license" (from program version 1.5.3.0)\\ \\ __“Project overview” window__\\ **ProjectEdit** ”Project > Edit project”\\ **ProjectAddDocument** ”Quality control plan > Add drawings sheet\\ **”ProjectAddInspPlan** ”Add quality control plan”\\ **ProjectEditInspPlan** ”Quality control plan > Edit quality control plan”\\ **ProjectDeleteInspPlan** ”Quality control plan > Delete quality control plan”\\ **<del>ProjectExportMenu</del>** ”Quality control plan > Export as” (used up to program version 1.3.7.0)\\ **ProjectExportJson** ”Quality control plan > Export as  Json Quality control plan”\\ **ProjectExportAscii** ”Quality control plan > Export as ASCII Quality control plan”\\ **ProjectExportDocument** ”Quality control plan > Export all Drawing graphics”\\ **ProjectExportStamps** ”Quality control plan > Export all Stamp graphics” (available from program version 1.2.0.29 upwards)\\ <del>**ProcejectExportStamps**</del> ”Quality control plan > Export as > Stamp graphics” (used up to and including program version 1.2.0.28)\\ ** ProjectExportExcel** ”Quality control plan > Export as Excel Quality control plan”\\ **ProjectExportCsv** ”Quality control plan > Export as CSV Quality control plan”\\ **ProjectCloseDocument** ”Quality control plan > Delete drawings sheet” (available  from program version 1.2.0.29 upwards)\\ <del>**ProjectCloseDokument**</del> ”Quality control plan > Delete drawings sheet” (used up to and including program version 1.2.0.28)\\ **DocumentVersionOpen** ”Quality control plan > Drawings sheet > Open drawings sheet version”\\ **DocumentVersionRemove** ”Quality control plan > Drawings sheet > Delete drawings sheet”\\ **DocumentVersionExportPdf** ”Quality control plan > Drawings sheet > Export as PDF”\\ **DocumentVersionExportSvg** ”Quality control plan > Drawings sheet > Export as SVG” (available from program version 1.2.0.31 upwards)\\ **DocumentVersionExportDwgDxf** "Quality control plan > Darwing sheet > Export as DWG/DXF"\\**CompareDocument** ”Quality control plan > Drawings sheet > Compare drawings sheet”\\ \\ __ “Characteristics overview window” and “Drawings window”__\\ ** CharacteristicContextMenu** ”Context menu”\\ **DocumentSplitCadBlock** ”Context menu > Explode" (available from program version 1.2.0.31 upwards)\\ **DeleteStampKey** Delete stamp or characteristic with DEL key or via Context menu (from program version 1.2.0.21 upwards)\\ **CharacteristicListClickOrderTool** Manually number (available from program version 1.5.3.0)\\ **CharacteristicListNumberClockwiseTool** Number clockwise (available from program version 1.5.3.0)\\ **CharacteristicListNumberReadDirectionTool** Number in reading direction (available from program version 1.5.3.0)\\ **CharacteristicListNumberBySortnumberTool** Renumber by list position (available from program version 1.5.3.0)\\ **CharacteristicListEditStartnumber** Start number (available from program version 1.5.3.0)\\ **CharacteristicListSortTool** Move in the list (available from program version 1.5.3.0)\\ \\ __“Characteristics overview” window__\\ **CharacteristicListToolBar** ”Toolbar” (available from program version 1.2.0.31 upwards)\\ <del>**CharacteristicListFilterToolBar**</del> Filter characteristics (used from programme version 2.5.0)\\ <del>** CharacterListToolBar**</del> ”Toolbar” (used up to and including program version 1.2.0.30)\\ \\ __ “Characteristics properties” window__\\ **CharacteristicDetailsView** ”Characeteristics properties window” (available from program version 1.2.0.31 upwards)\\ **CharacteristicDetailsStampNumber** Stamp number field (used from programme version 2.5.0)\\ **CharacteristicDetailsStampPrefix** Prefix field (also applied to the stamp-with-dialogue; used as of programme version 2.5.0)\\ **CharacteristicDetailsStampPostfix** Suffix field (also applied to the stamp-with-dialogue; used as of programme version 2.5.0)\\ <del>**CharaterDetailsView**</del> ”Characeteristics properties window” (used up to and including program version 1.2.0.30)\\ \\ __General__\\ **UnsavedChangesDialog** Dialog window "Unsaved changes", which is displayed when closing a project or the program if there are still unsaved changes; in this way a saving can be prevented at this point (from program version 1.3.0.0). |

</WRAP>
</WRAP>

\\ 

===== Status =====

<WRAP group>
<WRAP column 40%>

Accessibility status of control elements.

**Note 1** Settings dialogues can only be locked (“Disabled” status), even if the status “Hidden” or “Collapsed” is assigned to them.

**Note 2** The dialog window "Unsaved changes" (parameter "UnsavedChangesDialog") is completely suppressed with the parameters "Disabled", "Hidden" and "Collapsed".

</WRAP>
<WRAP column 55%>

<code javascript>
"AccessStatus": "Disabled"
</code>

|< 100% 33% 12% 54% >|
^  Parameter  ^  Type  ^  Value/Content  ^
^ AccessStatus | String | **Accessible** Accessible and visible (default value)\\ **Disabled** locked\\ **Hidden** Invisible, but occupying space\\ **Collapsed** Invisible and not occupying space\\ |

</WRAP>
</WRAP>

----

<WRAP group>
<WRAP col2>

<WRAP rightalign>

**Scroll backwards**\\ 
Configuration and Import > [[en:infra-convert:dev:stamptemplates|"StampTemplates” parameter file]]

</WRAP>

**Scroll forwards**\\ 
Configuration and Import > [[en:infra-convert:dev:toltab|Tolerance tables]]

</WRAP> </WRAP>
ELIAS GmbHProduktdokumentationen

User Tools

Site Tools

Page Tools

ELIAS GmbH
Produktdokumentationen
