ELIAS GmbH
Produktdokumentationen

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
~~NOTOC~~

<WRAP noprint>

> User manual #@IC_HTML@# > Settings > Settings

</WRAP>

<WRAP group>
<WRAP column 65%>
====== Export ======

----
</WRAP>
<WRAP column 30%>
> **Available in**\\ program version 1.1.5 and onwards
</WRAP>
</WRAP>

In the “Stamp” tab in the “Export” menu, you can alter the default stamp settings. Applied settings can be confirmed with **OK** or **Apply**, or discarded with **Cancel**.

\\ 

<WRAP noprint>
<WRAP group>
<WRAP column 48%>
//**__Content__**//

 • [[#Access function]]\\ 
 • [[#“Excel test plan” group]]\\ 
 • [[#“CSV export” group]]\\ 
 • [[#“Export in ASCII transfer format” group]]\\ 
 • [[#“Drawing graphic format” group]]\\ 
 • [[#“Stamp graphic format” group]]\\ 

\\ 

</WRAP>
</WRAP> </WRAP>

==== Access function ====

The menu can be accessed as followed:

<WRAP group>

<WRAP column 20%>
 **Menu bar**
</WRAP>

<WRAP column 75%>

Click on **Edit** and **Settings** in the drop-down menu that opens. This will open the “Settings” menu window. Select the **Export** tab in the list on the left-hand side of the window.

</WRAP>
</WRAP>

\\ 

==== “Excel test plan” group ====

|< 100% 8% 22% 55% 15%>| 
^  Option  ^^  Function  ^  Default setting  ^
^  {{ :en:infra-convert:user:functions:icon_steuerelement_eingabefeld.png?nolink&0x50 |}}  ^ Folder for Excel test plan templates | Set the directory path to load the templates from for the test plan export to Excel. |  %ProgramData%\ELIAS GmbH\infra-convert\ExcelReports  |
^ Decimal separator for nominal values and tolerances ^| **Note** The settings for decimal separators are no longer required from programme version 2.5.3. Nominal value and tolerance values are exported as numbers in a data format that is interpreted correctly in Excel regardless of the decimal separator setting. |  | 
^  {{ :en:infra-convert:user:functions:icon_steuerelement_optionsfeld.png?nolink&0x50 |}}  ^ Always use a dot. | Nominal sizes and tolerance values are always output with a dot as the decimal separator. | {{ :en:infra-convert:user:functions:icon_steuerelement_optionsfeld_0.png?nolink&0x50 |}} |
^  {{ :en:infra-convert:user:functions:icon_steuerelement_optionsfeld.png?nolink&0x50 |}}  ^ Always use a comma. | Nominal sizes and tolerance values are always output with a comma as the decimal separator. | {{ :en:infra-convert:user:functions:icon_steuerelement_optionsfeld_0.png?nolink&0x50 |}} |
^  {{ :en:infra-convert:user:functions:icon_steuerelement_optionsfeld.png?nolink&0x50 |}}  ^ Depends on thge current systems' culture. | Nominal sizes and tolerance values are output with the decimal separator, which is stored in the settings of the operatin system. | {{ :en:infra-convert:user:functions:icon_steuerelement_optionsfeld_1.png?nolink&0x50 |}} |
^  {{ :en:infra-convert:user:functions:icon_steuerelement_kontrollkaestchen.png?nolink&0x50 |}}  ^ Use Microsoft Excel for the export process. | Specifies that an installed Microsoft Excel should be used to write the Excel file.\\ \\ **Note** Available from programme version 2.4.6. |  {{ :en:infra-convert:user:functions:icon_steuerelement_kontrollkaestchen_1.png?nolink&0x50 |}}  |
^  {{ :en:infra-convert:user:functions:icon_steuerelement_kontrollkaestchen.png?nolink&0x50 |}}  ^ Transfer to Microsoft Excel without saving | Specifies that no Excel file is created during export. Instead, Microsoft Excel is opened to display the export result.\\ \\ **Note** Available from program version 3.1.0. |  {{ :en:infra-convert:user:functions:icon_steuerelement_kontrollkaestchen_0.png?nolink&0x50 |}}  |
^  {{ :en:infra-convert:user:functions:icon_steuerelement_kontrollkaestchen.png?nolink&0x50 |}}  ^ Open Microsoft Excel after the export process | Specifies that the exported Excel file is opened after export. This setting is also available in the export dialogue window.\\ \\ **Note** Available from programme version 2.4.6. |  {{ :en:infra-convert:user:functions:icon_steuerelement_kontrollkaestchen_1.png?nolink&0x50 |}}  |

\\ 

==== “CSV export” group ====

|< 100% 8% 22% 55% 15%>| 
^  Option  ^^  Function  ^  Default setting  ^
^  {{ :en:infra-convert:user:functions:icon_steuerelement_kontrollkaestchen.png?nolink&0x50 |}}  ^ Export an additional title line when performing a CSV export. | Determines that a title line will be exported when performing a CSV export. You will have the option to enter values for the title line during the export process. |  {{ :en:infra-convert:user:functions:icon_steuerelement_kontrollkaestchen_0.png?nolink&0x50 |}}  |

\\ 

==== “Export in ASCII transfer format” group ====

**Note** Available from program version 4.1.0.

{{page>en:infra-convert:user:config:export:dfd}}

\\ 


==== “Drawing graphic format” group ====

|< 100% 8% 22% 55% 15%>| 
^  Option  ^^  Function  ^  Default setting  ^
^  {{ :en:infra-convert:user:functions:icon_steuerelement_dropdown-listenfeld.png?nolink&0x50 |}}  ^ Format | Determines the file format in which the stamped drawing is to be exported.\\ \\ **Note** We recommend the PNG and TIF formats, especially the JPG format is not suitable for technical drawings. |  PNG  |
^  {{ :en:infra-convert:user:functions:icon_steuerelement_dropdown-listenfeld.png?nolink&0x50 |}}  ^ Colour depth | Determines the pixel colour depth. A larger value will increase the size of the file.\\ \\ **Note** You can set 24 bit and 8 bit, for GIF only 8 bit. Antialiasing is only possible with a color depth of 24 bits, so it cannot be used for GIF. If antialiasing is used, a lower resolution (width × height) is required. (Antialiasing is available from program version 1.5.2.0.) |  24  |
^  {{ :en:infra-convert:user:functions:icon_steuerelement_zaehlfeld.png?nolink&0x50 |}}  ^ Width | Determines the width of the image in pixels. |  4096  |
^  {{ :en:infra-convert:user:functions:icon_steuerelement_zaehlfeld.png?nolink&0x50 |}}  ^ Height | Determines the height of the image in pixels. |  3072  |
^  {{ :en:infra-convert:user:functions:icon_steuerelement_dropdown-listenfeld.png?nolink&0x50 |}}  ^ Antialiasing | Specifies the →[[en:infra-convert:user:terms#antialiasing|antialiasing]] method to be used.\\ \\ **Note** Recommendations can be found under "More > Terms > [[en:infra-convert:user:terms#antialiasing|Antialiasing]]". Antialiasing can only be applied at a colour depth of 24 bit and not for GIF.\\ **Note** Available from program version 2.2.6 |  Linear  |
^  {{ :en:infra-convert:user:functions:icon_steuerelement_zaehlfeld.png?nolink&0x50 |}}  ^ Quality level | Specifies the quality factor for →[[en:infra-convert:user:terms#antialiasing|antialiasing]].\\ \\ **Note** Recommendations can be found under "More > Terms > [[en:infra-convert:user:terms#antialiasing|Antialiasing]]". Antialiasing can only be applied at a colour depth of 24 bit and not for GIF.\\ **Note** Available from program version 2.2.6|  2  |
^  {{ :en:infra-convert:user:functions:icon_steuerelement_kontrollkaestchen.png?nolink&0x50 |}}  ^ Export drawing graphic when saving | Determines that the drawing sheets are to be exported when a project is saved. |  {{ :en:infra-convert:user:functions:icon_steuerelement_kontrollkaestchen_0.png?nolink&0x50 |}}  |
^ Drawing graphic options ^| ||
^  {{ :en:infra-convert:user:functions:icon_steuerelement_optionsfeld.png?nolink&0x50 |}}  ^ drawing graphic with stamps | The drawing will be issued with stamps. |  {{ :en:infra-convert:user:functions:icon_steuerelement_optionsfeld_1.png?nolink&0x50 |}}  |
^  {{ :en:infra-convert:user:functions:icon_steuerelement_optionsfeld.png?nolink&0x50 |}}  ^ drawing graphic without stamps | The drawing will be issued without stamps. |  {{ :en:infra-convert:user:functions:icon_steuerelement_optionsfeld_0.png?nolink&0x50 |}}  |


\\ 

==== “Stamp graphic format” group ====

|< 100% 8% 22% 55% 15%>| 
^  Option  ^^  Function  ^  Default setting  ^
^  {{ :en:infra-convert:user:functions:icon_steuerelement_dropdown-listenfeld.png?nolink&0x50 |}}  ^ Format | Determines the file format in which the stamp graphic is to be exported.\\ \\ **Note** We recommend the PNG and TIF formats, especially the JPG format is not suitable for technical drawings.  |  PNG  |
^  {{ :en:infra-convert:user:functions:icon_steuerelement_dropdown-listenfeld.png?nolink&0x50 |}}  ^ Colour depth | Determines the pixel colour depth. A larger value will increase the size of the file.\\ \\ **Note** You can set 24 bit and 8 bit, for GIF only 8 bit. Antialiasing is only possible with a color depth of 24 bits, so it cannot be used for GIF. If antialiasing is used, a lower resolution (width × height) is required. (Antialiasing is available from program version 1.5.2.0.) |  24  |
^  {{ :en:infra-convert:user:functions:icon_steuerelement_zaehlfeld.png?nolink&0x50 |}}  ^ Width | Determines the width of the image in pixels. |  1800  |
^  {{ :en:infra-convert:user:functions:icon_steuerelement_zaehlfeld.png?nolink&0x50 |}}  ^ Height | Determines the height of the image in pixels. |  1200  |
^  {{ :en:infra-convert:user:functions:icon_steuerelement_kontrollkaestchen.png?nolink&0x50 |}}  ^ Export stamp graphics when saving. | Determines that the stamp graphics are to be exported when a project is saved. |  {{ :en:infra-convert:user:functions:icon_steuerelement_kontrollkaestchen_0.png?nolink&0x50 |}}  |
^ Naming of stamp graphics ^|  |  | 
^  {{ :en:infra-convert:user:functions:icon_steuerelement_optionsfeld.png?nolink&0x50 |}}  ^ With the GUID of the stamp. | Sets the stamp graphics to be named with the GUID of the stamp.\\ \\ **Note** Available from program version 2.5.0 | {{ :en:infra-convert:user:functions:icon_steuerelement_optionsfeld_1.png?nolink&0x50 |}} |
^  {{ :en:infra-convert:user:functions:icon_steuerelement_optionsfeld.png?nolink&0x50 |}}  ^ Composed of inspection plan title, version and stamp text | Specifies that the name of the stamp graphics is built up from the test plan title, version and stamp text.\\ \\ **Note** Available from program version 2.5.0 | {{ :en:infra-convert:user:functions:icon_steuerelement_optionsfeld_0.png?nolink&0x50 |}} |

\\ 

<WRAP noprint>

----

<WRAP group>
<WRAP col2>

<WRAP rightalign>
**Go to previous page**\\ 
Settings > Settings > [[en:infra-convert:user:config:stamps|Stamp]]
</WRAP>

**Go to next page**\\ 
Settings > Settings > [[en:infra-convert:user:config:annotations|Annotation templates]]

</WRAP> </WRAP>

</WRAP>
ELIAS GmbHProduktdokumentationen

User Tools

Site Tools

Page Tools

ELIAS GmbH
Produktdokumentationen
