User Tools

Site Tools


en:infra-convert:user:config:export

This is an old revision of the document!


User manual infra CONVERT > Settings > Settings

Export


Available in
program version 1.1.5 and onwards

In the “Stamp” tab in the “Export” menu, you can alter the default stamp settings.

  • Click Apply to save the changes without closing the window,
  • click OK, to save the changes and close the window, or
  • click Cancel to discard the changes.

The settings will be saved for all projects.

Note In some circumstances, your CAQ system provider or administrator may prohibit changes to certain settings. If you choose an incorrect setting that disrupts your workflow, please contact the provider or administrator.

Access function

The menu can be accessed as followed:

Menu bar

Click on Edit and Settings in the drop-down menu that opens. This will open the “Settings” menu window. Select the Export tab in the list on the left-hand side of the window.


“Excel test plan” group

Option Function Default setting
Folder for Excel test plan templates Set the directory path to load the templates from for the test plan export to Excel. %ProgramData%\ELIAS GmbH\infra-convert\ExcelReports
Decimal separator for nominal values and tolerances
Always use a dot. Nominal sizes and tolerance values are always output with a dot as the decimal separator.

Avaiable from Program version 1.2.0.29
Always use a comma. Nominal sizes and tolerance values are always output with a comma as the decimal separator.

Avaiable from Program version 1.2.0.29
Depends on thge current systems' culture. Nominal sizes and tolerance values are output with the decimal separator, which is stored in the settings of the operatin system.

Avaiable from Program version 1.2.0.29


“CSV export” group

Option Function Default setting
Export an additional title line when performing a CSV export. Determines that a title line will be exported when performing a CSV export. You will have the option to enter values for the title line during the export process.


“Drawing graphic format” group

Option Function Default setting
Format Determines the file format in which the stamped drawing is to be exported. PNG
Colour depth Determines the pixel colour depth. A larger value will increase the size of the file.

Note You can set 24 bit and 8 bit, for GIF only 8 bit. Antialiasing is only possible with a color depth of 24 bits, so it cannot be used for GIF. If antialiasing is used, a lower resolution (width × height) is required. (Antialiasing is available from program version 1.5.2.0.)
24
Width Determines the width of the image in pixels. 4096
Height Determines the height of the image in pixels. 3072
Export drawing graphic when saving Determines that the drawing sheets are to be exported when a project is saved.
Issue drawing graphic
with stamps The drawing will be issued with stamps.
without stamps The drawing will be issued without stamps.


“Stamp graphic format” group

Option Function Default setting
Format Determines the file format in which the stamp graphic is to be exported. PNG
Colour depth Determines the pixel colour depth. A larger value will increase the size of the file.

Note You can set 24 bit and 8 bit, for GIF only 8 bit. Antialiasing is only possible with a color depth of 24 bits, so it cannot be used for GIF. If antialiasing is used, a lower resolution (width × height) is required. (Antialiasing is available from program version 1.5.2.0.)
24
Width Determines the width of the image in pixels. 1800
Height Determines the height of the image in pixels. 1200
Export stamp graphics when saving. Determines that the stamp graphics are to be exported when a project is saved.



Go to previous page
Settings > Settings > Stamp

Go to next page
Settings > Settings > Administration

en/infra-convert/user/config/export.1600687234.txt.gz · Last modified: 2020/09/21 13:20 by me