ELIAS GmbH
Produktdokumentationen

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
|< 100% 5% 15% 40% 40%>|
^  Step  ^^  Action  ^  Result  ^
^  1  ^ Open drawing sheet | Open the drawing sheet that you would like to stamp. | The drawing sheet is displayed in the drawing window. |
^  2  ^ Activate stamp tool | Click on the **Stamp tool** button in the [[en:infra-convert:user:interface:toolbar|Toolbar]] {{:en:infra-convert:user:interface:icon_werkzeug_stempeln.png?nolink&15|}}. | If you now move the mouse pointer into the drawing window, it will be displayed as a stamp ({{:en:infra-convert:user:interface:icon_mauszeiger_stempel.png?nolink&15|}}). At the bottom left of the drawing window, the "Stamp with" dialog box appears:\\ {{ :en:infra-convert:user:functions:ic-dialogfenster_stempeln_mit.png?nolink&200 |}} |
^  3  ^ Check/set start value for the numbering | **1)** Define the start value in the window [[de:infra-convert:user:interface:featuretable|Characteristic properties]].\\ \\ The number is assigned to the first characteristic in the test plan during stamping that is stored in the settings (see Customization > Settings > [[en:infra-convert:user:config:stamps|Stamp]]) as a start value, by default "1". Each additional stamp receives a number incremented by the set increment. The counter will be at the lowest possible value if characteristics are already present in the test plan. | The counter for the numbering in the example is set as required at "1":\\ {{ :en:infra-convert:user:functions:funktionsfenster_merkmalsuebersicht_leer.png ?nolink&400 |}} |
^  :::  ^ ::: | **2)** In the "Stamp with" dialog box, define properties that should be taken into account when stamping:\\ - Prefix, Suffix\\ - Categorie\\ - Tag | **2)** The stamp properties are correctly selected. |
^  4  ^ Define characteristic position | Move the mouse pointer ({{:en:infra-convert:user:interface:icon_mauszeiger_stempel.png?nolink&15|}}) onto the characteristic postition and double-click with the left mouse button. | The "Create new characteristic" quick entry dialog opens:\\ {{ :en:infra-convert:user:functions:dialogfenster_neues_merkmal_erzeugen.png?nolink&300 |}} |
^  5  ^ Enter characteristic text | Enter the relevant characters of the characteristic in the "Characteristic text" field using the keyboard. Use the geometry icons below if this is required.\\ \\ **Note 1** Use the blank button to remove a geometry icon.\\ \\ **Note 2** The input text is converted into a fully fledged characteristic and not stored as a note text characteristic (unless this is regarding a note text). | By way of example, a characteristic of the specification elements "⌀42", an upper deviation of "0.2" and a lower deviation of "-0.1" is applied. Click on the **⌀** button and enter the text "42+0,2-0,1":\\ {{ :en:infra-convert:user:functions:dialogfenster_neues_merkmal_erzeugen_beispiel1.png?nolink&300 |}} |
^  6  ^ Create characteristic and position stamp | **1)** Click on **Create.** | **1)** The characteristic is listed in the Characteristics overview:\\ {{ :en:infra-convert:user:functions:ic_programmoberflaeche_merkmal_manuell_erstellt.png?nolink&400 |}} |
^  :::  ^ ::: | **2)** The stamp is not yet anchored, but still coupled to the mouse pointer. Move the mouse pointer over the drawing surface in such a way, that the stamp is positioned and oriented as required. Then use the left mouse button to click just the once. | **2)** The stamp is now linked to the drawing. |
ELIAS GmbHProduktdokumentationen

User Tools

Site Tools

Page Tools

ELIAS GmbH
Produktdokumentationen
