ELIAS GmbH
Produktdokumentationen

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
~~NOTOC~~

<WRAP noprint>

> User manual #@IC_HTML@# > Functions > Drawings

</WRAP>

====== Compare drawings (Pro version) ======

----

With this function, you can create a new test plan version (“target”) based on an existing test plan version (“source”) within a project. In this way, you can create an adjusted test plan for a new version of a drawing with minimal effort. Only new or edited characteristics must be stamped again.

The test plan versions are interlinked when this function is applied. The changes can be seen clearly and any existing characteristic numbers cannot be assigned to new characteristics.

<WRAP noprint>
<WRAP group>
<WRAP column 35%>
//**__Content__**//

 • [[en:infra-convert:user:functions:drwcomp#Workflow]]\\ 
 • [[en:infra-convert:user:functions:drwcomp#Customization]]

\\ 

</WRAP>
</WRAP> </WRAP>

==== Workflow ====

|< 100% 5% 15% 40% 40% >|
^  Step  ^^  Action  ^  Result  ^
^  1  ^ Invoke function | In the “Project overview” function window, right-click on the target drawing sheet for which you wish to transfer the test characteristics into the test plan. In the context menu that opens, click on **Compare drawing sheet** ({{:en:infra-convert:user:interface:icon_zeichnungen_vergleichen.png?nolink&15|}}):\\ {{:en:infra-convert:user:functions:projekt-explorer_dokumente_vergleichen.png?nolink&400}} | This opens the “Compare drawing sheet versions” dialogue window. It will show you a list of the source drawing sheets available for comparison: {{:en:infra-convert:user:functions:dialogfenster_dokumente_vergleichen.png?nolink&400}}\\ \\ **Note** A source drawing sheet must have a different test plan version assigned to it than the target drawing sheet version. |
^  2  ^ Select source | Select the corresponding drawing sheet and click on **OK**. | The working area will be transformed. As described under User interface > Function window > [[en:infra-convert:user:interface:drwcomp|Drawing comparison,]] the “Compare drawing” function window is displayed at the bottom left as well as the source and target drawing window placed directly above:\\ {{:en:infra-convert:user:functions:programmfenster_dokumente_vergleichen_start.png?nolink&400}} |
^  3  ^ Apply characteristics | Click on the blue **Apply characteristics** button in the “Drawing comparison” function window to automatically compare all characteristics.\\ \\ **Note** The blue button will only be displayed when starting a new drawing sheet comparison. The **Apply characteristics** button ({{:en:infra-convert:user:interface:icon_merkmale_uebertragen.png?nolink&15|}}) in the toolbar initiates the same function. | All target characteristics now entered were recognised as unchanged, see the “Status” column.\\ \\ Characteristics \\ - with a modified property,\\ - that no longer exist,\\ - have been extracted from text blocks\\ - must be stamped as a group or\\ - must be added manually\\ will be tagged with the status “Not found”:\\ {{:en:infra-convert:user:functions:programmfenster_merkmale_uebertragen_ende.png?nolink&400}} |
^  [4]  ^ [Optional]\\ Compare drawing views | If characteristics of an entire view cannot be applied, this could be because the view has been moved by the drawing creator, either within the sheet itself or to another sheet. For this reason, you have the option to compare drawing views.\\ \\ Complete the steps described [[en:infra-convert:user:functions:viewcomp|here]] (Functions > Drawings > Compare drawing views) and then continue with step 5 as described below. ||
^  5  ^ Merge changed characteristics | **1)** Go through the characteristic list. Characteristics \\ - with a modified property,\\ - that must be stamped as a group,\\ - can only be stamped once a text block has been deconstructed\\ - or must be added manually\\  can now be merged manually.\\ \\ **Note** Double-click on a characteristic in the list in order to centre the drawing window on it, and you can also enlarge it using the **Zoom to centre** tool ({{:en:infra-convert:user:interface:icon_werkzeug_mittelpunkt_heranzoomen.png?nolink&15}}). \\ \\ In the corresponding row, click on the **Merge** button ({{:en:infra-convert:user:interface:icon_merkmal_zusammenfuegen.png?nolink&15}}). Then, move the cursor to the target characteristic on the drawing sheet.\\ \\ In this example, characteristic no. 2, which has had its tolerance property changed from the default to a specified tolerance of “±0.8”, will be applied to the new test plan version upon merging:\\ {{:en:infra-convert:user:functions:programmfenster_merkmal_zusammenfuegen_start.png?nolink&400}} | **1)** The stamp function is active. The cursor changes to the stamp icon {{:en:infra-convert:user:interface:cursor_stamp_merge.png?nolink&15}}:\\ {{:en:infra-convert:user:functions:programmfenster_merkmal_zusammenfuegen_auswahl.png?nolink&400}} |
^  :::  ^ ::: | **2)** Stamp the characteristic \\ - as a single characteristic, \\ - as a group (see also Functions > Characteristics > [[en:infra-convert:user:functions:ballooning|Automatically stamp]]) or\\ - manually (see also Functions > Characteristics > [[en:infra-convert:user:functions:ballooning_man|Manually stamp]]). | **2a)** If there are varying characteristic properties, the “Varying characteristics” dialogue window will open:\\ {{:en:infra-convert:user:functions:dialogfenster_merkmale_unterschiedlich.png?nolink&400}}\\ \\ **2b)** This prompt does not appear if there are no differences. Instead, the characteristic is applied directly as a target characteristic and marked as unchanged. You can disregard step 3 in this case. |
^  :::  ^ ::: | **3)** Click on **Yes** to create a new characteristic. | **3)** A new characteristic has been created. The differences to the comparison characteristic are retained in the “Changed properties” column in the characteristic list. Depending on the setting "Stamp marking when merging" (see [[en:infra-convert:user:functions:drwcomp#Adjustment|Adjustment]]), a feature with the same label will be created:\\ {{:en:infra-convert:user:functions:programmfenster_unterschiedliche_merkmale_zusammenfuegen.png?nolink&400}}\\ \\ or a new stamp number will be created:\\ {{:en:infra-convert:user:functions:programmfenster_unterschiedliche_merkmale_zusammenfuegen_neues_merkmal.png?nolink&400}} |
^  [6]  ^ [Optional]\\ Export compare list | The currently displayed comparison list can be exported in XLSX or CSV format by clicking **Export characteristics comparison list** ({{:en:infra-convert:user:interface:icon_export_pruefplan.png?nolink&15|}}) in the toolbar. ||
^  7  ^ Close function window | Close the function via by clicking **Exit compare mode** ({{:en:infra-convert:user:interface:icon_bestaetigen.png?nolink&15|}}) in the toolbar.\\ \\ **Note** You can go back at any point to view the comparisons made and to edit them further. To do so, invoke the function as described under step 1. | The drawing window opens with the target drawing sheet. You can continue working as usual here. |

\\ 

==== Customization ====

This function can be influenced via the following settings:

<WRAP group>
<WRAP column 25%>

**Numbering**

</WRAP>

<WRAP column 65%>

Specify whether the characteristic number should be retained or newly assigned when merging.\\ **See** Settings > Settings > Stamps > [[en:infra-convert:user:config:stamps#number_assignment_during_drawing_comparison_group|“Number assignment during drawing comparison” group]]

</WRAP>
</WRAP>

<WRAP group>
<WRAP column 25%>

**Manually inserted characteristics**

</WRAP>

<WRAP column 65%>

Specify whether you want manually inserted characteristics to be transferred automatically during transfer. (Available from program version 1.2.1.6.)\\ **See** Settings > Settings > Stamp > [[en:infra-convert:user:config:stamps#“Transfer of manually inserted characteristics during drawing comparison” group|“Transfer of manually inserted characteristics during drawing comparison” group]]

</WRAP>
</WRAP>

----

<WRAP noprint>

<WRAP group>
<WRAP col2>

<WRAP rightalign>
**Go to previous page**\\ 
Functions > Drawings > [[en:infra-convert:user:functions:drwcompsimple|Compare drawings (basic version)]]
</WRAP>

**Go to next page**\\ 
Functions > Drawings > [[en:infra-convert:user:functions:viewcomp|Compare drawing views (Pro version)]]

</WRAP> </WRAP>

</WRAP>
ELIAS GmbHProduktdokumentationen

User Tools

Site Tools

Page Tools

ELIAS GmbH
Produktdokumentationen
