ELIAS GmbH
Produktdokumentationen

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
~~NOTOC~~

<WRAP noprint>

> User manual #@IC_HTML@# > Functions > Drawings

</WRAP>

====== Compare drawings (basic version) ======

----

With this function, you can create a new test plan version (target) based on an existing test plan version (source) within a project. In this way, you can create an adjusted test plan for a new version of a drawing with minimal effort. Only new or edited characteristics must be stamped again.

\\ 

<WRAP noprint>
<WRAP group>
<WRAP column 35%>
//**__Content__**//

 • [[en:infra-convert:user:functions:drwcompsimple#Workflow]]\\ 
 • [[en:infra-convert:user:functions:drwcompsimple#Customization]]

\\ 

</WRAP>
</WRAP> </WRAP>

|< 100% 5% 15% 40% 40% >|
^  Step  ^^  Action  ^  Result  ^
^  1  ^ Call function | **1)** In the "Project overview", right-click the target drawing sheet to whose test plan version you want to transfer characteristics.\\ {{ :en:infra-convert:user:functions:zeichnungsvergleich_blattversionen_auswaehlen.png?nolink&400 |}} | **1)** A context menu opens. |
^  :::  ^ ::: | **2)** Under the **Compare drawing sheet** entry ({{:en:infra-convert:user:interface:icon_zeichnungen_vergleichen.png?nolink&15|}}), first select the source test plan version and then the source drawing sheet.\\ \\ **Note** A source drawing sheet must be assigned to a different test plan version than the version of the target drawing sheet.\\ \\ **Note** Up to program version 2.10.3 the source drawing sheets were selected in a separate window. | **2)** The drawing comparison mode is started. The source and target drawing windows are displayed side by side.\\ \\ **See** User interface > Function windows > [[en:infra-convert:user:interface:drwcomp|Drawing comparison]] |
^  2  ^ Transfer characteristics | Click on the **Transfer characteristics** button ({{:de:infra-convert:user:interface:icon_merkmale_uebertragen.png?nolink&15|}}) in the toolbar in the function window to automatically compare all characteristics. | All characteristics that do not meet one of the following criteria are transferred. |
^  :::  ^ ::: | **When is a characteristic automatically transferred?**\\ A characteristic is automatically transferred (A) unless one of the following cases applies:\\  B) The drawing entry has changed in its properties.\\  C) The drawing entry no longer exists or has been moved.\\  D) The drawing entry is located in a grouped element.\\  E) The drawing entry is not grouped in the target.\\  F) The characteristic was inserted manually on the source drawing sheet and the setting that manually inserted characteristics should be transferred automatically is not set, see [[#Customization]].\\ \\ {{ :en:infra-convert:user:functions:zeichnungsverleich_automatisches_uebertragen.png?nolink&650 |}}\\ \\ **Note** You can check whether elements are grouped or separated by activating the **Stamp tool** ({{:en:infra-convert:user:interface:icon_werkzeug_stempeln.png?nolink&15|}}) and moving the mouse pointer over the elements. Elements that belong together are highlighted together. ||
^  [3a]  ^ [Optional]\\ Explode groupings in the target | In case characteristics were not transferred because the target drawing entries are grouped in a block of drawing elements (case D), you can explode the block and then click **Transfer Characteristics** ({{:en:infra-convert:user:interface:icon_merkmale_uebertragen.png?nolink&15|}}) again. It may be necessary to exploded a block several times.\\ \\ **See** Functions > Characteristics > [[en:infra-convert:user:functions:disassemble|Deconstruct text block]] ||
^  4  ^ Close function window | Close the function via **Exit drawing comparison**. ({{:de:infra-convert:user:interface:icon_verlassen.png?nolink&15|}}) in the toolbar.\\ \\ **Note** You can return at any time to view and further edit the comparisons made. To do this, call up the function as described in step 1. | The drawing window opens with the target drawing sheet. Here you can continue working as usual. |

\\ 
==== Customization ====

You can influence the function with the following settings:

<WRAP group>
<WRAP column 25%>

**Manually inserted characteristics**

</WRAP>

<WRAP column 65%>

Specify whether manually inserted characteristics are to be transferred automatically during transfer.\\  **See** Settings > Settings > Stamp > [[en:infra-convert:user:config:stamps#Group „Transfer of manually inserted characteristics during drawing comparison“|Group „Transfer of manually inserted characteristics during drawing comparison“]]

</WRAP>
</WRAP>

----

<WRAP noprint>

<WRAP group>
<WRAP col2>

<WRAP rightalign>
**Go to previous page**\\ 
Functions > Drawings > [[en:infra-convert:user:functions:layer|Edit layers]]
</WRAP>

**Go to next page**\\ 
Functions > Drawings > [[en:infra-convert:user:functions:drwcomp|Compare drawings (Pro version)]]

</WRAP> </WRAP>

</WRAP>
ELIAS GmbHProduktdokumentationen

User Tools

Site Tools

Page Tools

ELIAS GmbH
Produktdokumentationen
