ELIAS GmbH
Produktdokumentationen

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
~~NOTOC~~

<WRAP noprint>

> User manual #@IC_HTML@# > Functions > Characteristics

</WRAP>

====== Compare drawing views (Pro version) ======

----

The **Compare drawing views** function ({{:en:infra-convert:user:interface:icon_in_ansicht_uebertragen.png?nolink&0x15}}) function extends the characteristics transfer function ({{:en:infra-convert:user:interface:icon_merkmale_uebertragen.png?nolink&15|}}).\\  **See** Functions > Drawings > Drawing comparison > [[en:infra-convert:user:functions:drwcomp#arbeitsablauf|Workflow]] > 2 – Transfer characteristics

It is used in the following cases:

**A – Only the areas visible in the drawing window are to be compared**

Only drawing entries (and manually inserted stamps) that are displayed in the source drawing window should be included in the comparison.

{{ :en:infra-convert:user:functions:zeichnungsansichten_vergleichen_fall_1.png?nolink&700 }}

**B – A shifted drawing view is to be found again in the comparison**

A drawing view has shifted in the target drawing sheet in relation to the sheet origin compared to the position on the source drawing sheet. The characteristics are therefore not found again during automatic transfer ({{:en:infra-convert:user:interface:icon_merkmale_uebertragen.png?nolink&15|}}).\\ 
 **See** Functions > Drawings > Drawing comparison > [[en:infra-convert:user:functions:drwcomp#arbeitsablauf|Workflow]] > 2 – Transfer characteristics

{{ :en:infra-convert:user:functions:zeichnungsansichten_vergleichen_fall_2.png?nolink&700 }}

\\ 

<WRAP noprint>
<WRAP group>
<WRAP column 35%>
//**__Content__**//

 • [[en:infra-convert:user:functions:viewcomp#Workflow]]\\ 
 • [[en:infra-convert:user:functions:viewcomp#Customization]]

\\ 

</WRAP>
</WRAP> </WRAP>

==== Workflow ====

|< 100% 5% 15% 40% 40% >|
^  Step  ^^  Action  ^  Result  ^
^  1  ^ Call function | **1)** In the "Project overview", right-click the target drawing sheet to whose test plan version you want to transfer characteristics.\\ {{ :en:infra-convert:user:functions:zeichnungsvergleich_blattversionen_auswaehlen.png?nolink&400 |}} | **1)** A context menu opens. |
^  :::  ^ ::: | **2)** Under the **Compare drawing sheet** entry ({{:en:infra-convert:user:interface:icon_zeichnungen_vergleichen.png?nolink&15|}}), first select the source test plan version and then the source drawing sheet.\\ \\ **Note** A source drawing sheet must be assigned to a different test plan version than the version of the target drawing sheet.\\ \\ **Note** Up to program version 2.10.3 the source drawing sheets were selected in a separate window. | **2)** The drawing comparison mode is started. The source and target drawing windows are displayed side by side.\\ \\ **See** User interface > Function windows > [[en:infra-convert:user:interface:drwcomp|Drawing comparison]] |
^  2  ^ Fit areas in view | Fit the area to be transferred on the drawing into the drawing window. | The area is fitted. |
^  [3]  ^ [Optional]\\ Align areas for view | If you want to compare shifted areas on the drawing sheets (use case B):\\ \\ **1)** Un-synchronize the drawing windows by clicking **Sync compare view** ({{:en:infra-convert:user:interface:icon_fenster_synchronisiert.png?nolink&0x15}}) in the toolbar and activate the auxiliary centerlines by clicking **Show grid** ({{:en:infra-convert:user:interface:icon_hilfslinien.png?nolink&0x15}}). | **1)** The drawing windows are decoupled ({{:en:infra-convert:user:interface:icon_fenster_synchronisieren.png?nolink&0x15}}) and auxiliary lines show the centers of the drawing windows.\\ {{:en:infra-convert:user:functions:zeichnungsansichten_vergleichen_01.png?nolink&400}} |
^  :::  ^  :::  | **2)** Align the drawing views so that the center of each drawing window is on the same point in the views, for example, on a corner of the part. | **2)** Source and target drawing views are aligned with each other:\\ {{:en:infra-convert:user:functions:zeichnungsansichten_vergleichen_02.png?nolink&400}} |
^  4  ^ Transfer characteristics | Click the **Transfer displayed characteristics** button\\ ({{:en:infra-convert:user:interface:icon_in_ansicht_uebertragen.png?nolink&0x15}}) in the toolbar. | All visible characteristics are transferred.\\ {{:en:infra-convert:user:functions:zeichnungsansichten_vergleichen_03.png?nolink&400}} |

\\ 

==== Customization ====

This function can be influenced via the following settings:

<WRAP group>
<WRAP column 25%>

**Numbering**

</WRAP>

<WRAP column 65%>

Specify whether the characteristic number is to be retained or reassigned during merging.\\ **See** Settings > Settings > Stamp > [[en:infra-convert:user:config:stamps#“Number assignment during drawing comparison” group|“Number assignment during drawing comparison” group]]

</WRAP>
</WRAP>

<WRAP group>
<WRAP column 25%>

**Manually inserted characteristics**

</WRAP>

<WRAP column 65%>

Specify whether you want manually inserted characteristics to be transferred automatically during transfer. (Available from program version 1.5.5.4.)\\ **See** Settings > Settings > Stamp > [[en:infra-convert:user:config:stamps#“Transfer of manually inserted characteristics during drawing comparison” group|“Transfer of manually inserted characteristics during drawing comparison” group]]

</WRAP>
</WRAP>

\\ 

<WRAP noprint>

----

<WRAP group>
<WRAP col2>

<WRAP rightalign>
**Go to previous page**\\ 
Functions > Drawings > [[en:infra-convert:user:functions:drwcomp|Compare drawings (Pro version)]]
</WRAP>

**Go to next page**\\ 
Functions > Characteristics > [[en:infra-convert:user:functions:ballooning|Automatic stamping]]

</WRAP> </WRAP>

</WRAP>
ELIAS GmbHProduktdokumentationen

User Tools

Site Tools

Page Tools

ELIAS GmbH
Produktdokumentationen
