Tolerance tables
The general tolerance tables valid for the project can be selected on the Tolerance tables tab of the Project settings menu. Click on
- Apply, at the bottom of the window to save the changes without closing the window,
- on OK, to save the changes and close the window or
- on Cancel, to discard the changes.
The settings are saved with the project.
Note Your CAQ system provider or administrator may be able to prevent you from changing some settings under certain circumstances. Please contact them if an incorrectly set option interrupts your workflow.
The default values of the settings can be specified in the parameter file “Settings”, see Administrator Manual infra CONVERT > Configuration and Import > Parameter File "Settings".
Invoke
The menu can be invoked as follows:
Menu bar
Click on Edit and then on Project settings in the drop-down menu that opens. The Project settings menu window opens. Select the Tolerance tables tab in the list on the left side of the window.
“Length measurements” group
| Option | Function | Default setting | |
|---|---|---|---|
 | Table | Defines norm and table in the norm. | DIN ISO 2768-1:1991-06, table 1 |
| | Tolerance class/series | Defines the tolerance class/series | m |
“Angular measurements” group
| Option | Function | Default setting | |
|---|---|---|---|
| | Table | Defines norm and table in the norm. | DIN ISO 2768-1:1991-06, table 3 |
| | Tolerance class/series | Defines the tolerance class/series With [Do not assign automatically] you can specify that the tolerance class should not be assigned when a characteristic is created. Such characteristics are marked in the list of characteristics in order to be able to select the correct class in a case-by-case decision.¹ Note¹ Available from program version 4.2.7. | [Do not assign automatically] |
“Radius of curvature and chamfers” group
| Option | Function | Default setting | |
|---|---|---|---|
| | Table | Defines norm and table in the norm. | DIN ISO 2768-1:1991-06, table 2 |
| | Tolerance class/series | Defines the tolerance class/series | m |
Save/Export
Note Available from programme version 2.4.1.
You can save the currently set project settings (definitions for tolerance tables, tags, categories and stamp templates) as a template for new projects. To do this, click on the Save … button in the bottom right-hand corner.
| Function | Description | |
|---|---|---|
 | Save as … | Export the currently set definitions for tags, categories and stamp templates to a directory of your choice. The configuration files “CharacteristicTags.json”, “SpecialCategories.json” and “StampTemplates.json” are exported. |
| Set as default (Admin) | Set the currently defined definitions for tolerance tables, tags, categories and stamp templates as default. The definitions for the tolerance tables are written into “Settings.json” in the programme data directory (“ProgramData”). The definitions for tags, categories and stamp templates are written by overwriting the configuration files “CharacteristicTags.json”, “SpecialCategories.json” and “StampTemplates.json” in the program data directory. Note How to start infra CONVERT in administrator mode is described here: “Settings > Settings > Administration > Open”. |
|
When setting as default the project template files in the directory “%ProgramData%/ELIAS GmbH/infra-Convert” are exchanged. During an update they will be overwritten with standard template files and deleted during uninstallation. They should therefore be saved and inserted after an over-installation (update) or new installation.
