| Property | Brief description | Reference | |
|---|---|---|---|
| Title | Reflects the significant property assignments of the characteristic. | Settings > Settings > Characteristics > "Format characteristic title" | |
 | Type | Assignment of the fundamental characteristic property “variable” or “attributive”. | →Characteristic |
 | Value | For variable characteristics the nominal size, for attributive characteristics the word specification. | →Measurement (sizes-) |
 | Class | Type of characteristic that informs you how to interpret the properties. | →Class |
| | Category | Relevance / priority of the characteristic for the test. | →Category Settings > Project settings > Categories |
| | Nominal size | Intolerant part of the size in the form of the measured value. The unit of measurement results from the assigned characteristic class. | →Measurement (sizes-) |
| | Upper tolerance | Position of the upper measurement limit. Either specified as an upper deviation or upper limit measurement or maximum. The unit of measurement results from the assigned class. | →Measurement (sizes-) |
| | Lower tolerance | Position of the lower measurement limit. Either specified as a lower deviation or lower limit measurement or minimum. The unit of measurement results from the assigned characteristic class. | →Measurement (sizes-) |
| | Tolerance class | Abbreviation, consisting of basic size and basic tolerance level in accordance with DIN EN ISO 286-1 and DIN EN ISO 286-2 (“Tolerance, sizes and fits”), e.g. “H7”. | |
| | Reference | References from a reference system in accordance with DIN EN ISO 1101 (“Tolerance of shape, direction, location and course”), e.g. “A”. | |
 | B-System | References from other reference systems than in accordance with DIN EN ISO 1101 (“Tolerance of shape, direction, location and course”). | |
| | Modifiers | Specification modifiers valid for this characteristic, specified as abbreviations, e.g. “E” for determining the enveloping condition. | |
| | Comment | Individual comment about the characteristic, e.g. a test note. | |
| | Repetitions | Number of geometry elements to which the measurement element refers. | |
 | Field | Key of the field in which the characteristic is located on the drawing sheet. | Functions > Drawings > Define field devision →Drawing sheet |
 | Tolerance table | Select tolerance table to be used to determine the size or limit measurements. The tables can be selected from a corresponding norm and tolerance class or series. | Settings > Project settings > Tolerance tables →Tolerance table |