infra CONVERT
blue DAT • infra DAT
mdm TOOL
Sidebar
en:infra-convert:dev:toltab_neu
This is an old revision of the document!
Columns
In the Columns field, the tolerance values are assigned to the nominal dimension intervals (variant A) or the number of decimal places of nominal dimensions (variant B). A column represents a tolerance class (series). Within a column definition, only one of the two assignment variants A or B can be selected.
See also
User’s Guide infra CONVERT > Settings > Project Settings > Tolerance tables
User’s Guide infra CONVERT > User Interface > Function Window > Feature properties
"Columns": [ { "Name": "m", "Fields": [ { "MinValue": 0, "MaxValue": 0.499 }, { "MinValue": 0.499, "MaxValue": 3, "UpperTolerance": 0.1, "LowerTolerance": -0.1 }, { "MinValue": 3, "MaxValue": 1000, }, { "MinValue": 1000, "MaxValue": 2000, "UpperTolerance": 0.5, "LowerTolerance": -0.5, "MaxPercent": 25.0 }, { "MinValue": 2000, "MaxValue": 4000, "UpperTolerancePercent": 0.5, "LowerTolerancePercent": -0.5, "ExtraAmount": 0.6 } ] }, { "Name": "According to digits", "Fields": [ { "MinDigits": 0, "MaxDigits": 0 }, { "MinDigits": 1, "MaxDigits": 1, "UpperTolerance": 0.3, "LowerTolerance": -0.3 }, { "MinDigits": 2, "MaxDigits": 2, "UpperTolerance": 0.10, "LowerTolerance": -0.10 }, { "MinDigits": 3, "MaxDigits": 300, "UpperTolerance": 0.050, "LowerTolerance": -0.050 } ] } ]
| Parameter | Type | Value/Content |
|---|---|---|
| Columns | Field | Contains all the columns in the table |
| Fields | Field | Contains the assignments of tolerance values to nominal intervals |
| Name | String | Display name that allows the user to clearly assign the tolerance class/series |
| Variant A: The numerical value of a nominal dimension is used to assign the tolerance values | ||
| MinValue | Decimal | Lower limit (LL) of the nominal dimension interval, value included: LL > Value |
| MaxValue | Decimal | Upper limit (UL) of the nominal dimension interval, value included: UL ≤ Value |
| Variant B: The number of decimal places after the decimal point of a nominal dimension is used to assign the tolerance values | ||
| MinDigits | Integer | Lower limit of the interval of the number of decimal places: 0 x 1 x.x 2 x.xx 3 x.xxx … Note Available from programme version 2.8.0. |
| MaxDigits | Integer | Upper limit of the interval of the number of decimal places: 0 x 1 x.x 2 x.xx 3 x.xxx … Note Available from programme version 2.8.0. |
| Tolerance values | ||
| UpperTolerance | Decimal | Upper limit deviation (UT) as absolute value: UT = Value |
| LowerTolerance | Decimal | Lower limit deviation (UT) as absolute value: LT = Value |
| UpperTolerancePercent | Decimal | Upper limit deviation (UT) as a percentage of the nominal value (N), figures in percent, result rounded to tenth decimal digit: OT = Value × N |
| LowerTolerancePercent | Decimal | Lower limit deviation (LT) as a percentage of the nominal value (N), figures in percent, result rounded to tenth decimal digit: LT = Value × N |
| MaxPercent | Decimal | The amounts of the limit deviations are limited to a maximum of this percentage of the nominal value, figures in percent: max(|UT|) = Value × N max(|LT|) = Value × N |
| ExtraAmount | Decimal | Surcharge on the limit deviation as absolute value: UTnew = OT + Value UTnew = LT - Value |
en/infra-convert/dev/toltab_neu.1634889060.txt.gz · Last modified: 2021/10/22 09:51 by me
