User Tools

Site Tools


en:infra-convert:user:interface:feature_sub1_en

This is an old revision of the document!


Property Brief description Reference
Title Reflects the significant property assignments of the characteristic. Settings > Settings > Characteristics > "Format characteristic title"
Type Assignment of the fundamental characteristic property “variable” or “attributive”. Characteristic
Value For variable characteristics the nominal dimension, for attributive characteristics the word specification. Measurement (sizes-)
Class Type of characteristic that informs you how to interpret the properties. Class
Category Relevance / priority of the characteristic for the test. Category

Settings > Project settings > Categories
Nominal dimension Intolerant part of the dimension in the form of the measured value. The unit of measurement results from the assigned characteristic class. Measurement (sizes-)
Upper tolerance Position of the upper measurement limit. Either specified as an upper dimension or upper limit measurement or maximum. The unit of measurement results from the assigned class. Measurement (sizes-)
Lower tolerance Position of the lower measurement limit. Either specified as a lower dimension or lower limit measurement or minimum. The unit of measurement results from the assigned characteristic class. Measurement (sizes-)
Tolerance class Abbreviation, consisting of basic dimension and basic tolerance level in accordance with DIN EN ISO 286-1 and DIN EN ISO 286-2 (“Tolerance, dimensions and fits”), e.g. “H7”.
Reference References from a reference system in accordance with DIN EN ISO 1101 (“Tolerance of shape, direction, location and course”), e.g. “A”.
B-System References from other reference systems than in accordance with DIN EN ISO 1101 (“Tolerance of shape, direction, location and course”).
Conditions Specification modifiers valid for this characteristic, specified as abbreviations, e.g. “E” for determining the enveloping condition.
Comment Individual comment about the characteristic, e.g. a test note.
Repetitions Number of geometry elements to which the measurement element refers.
Tolerance table Select tolerance table to be used to determine the dimension or limit measurements. The tables can be selected from a corresponding norm and tolerance class or series. Settings > Project settings > Tolerance tables

Tolerance table
en/infra-convert/user/interface/feature_sub1_en.1519648725.txt.gz · Last modified: 2018/02/26 13:38 by me