infra CONVERT
blue DAT • infra DAT
mdm TOOL
Sidebar
en:infra-convert:user:config:stamps
Stamp
General stamp settings can be customized on the Stamp tab of the Settings menu. Applied settings can be confirmed with OK or Apply, or discarded with Cancel.
Invoke
The menu can be invoked as follows:
Menu bar
Click on Edit and then on Settings in the drop-down menu that opens. The “Settings” menu window opens. Select the Stamp tab in the list on the left side of the window.
“Marking” group
Note The settings were moved to the page Characteristic with program version 4.2.0.
| Option | Function | Default setting | |
|---|---|---|---|
 | Start value | Sets the default number which is to be initially assigned when stamping. | 1 |
| | Increment | Sets the increment of the characteristic numbers to be assigned. This value forms the difference between one stamp number and the next. | 1 |
 | Set minimum Number of Digits | Sets the minimum number of digits with which the stamp number is displayed in stamp texts. Missing digits are filled with zeros, example: If three digits are given, a “1” becomes a “001”. Note Available from programme version 2.6.1. |  |
| | Set minimum Number of Digits | 3 | |
“Number assignment during drawing comparison” group
Note The setting was moved to the page Comparison with program version 4.2.0.
| Option | Function | Default setting | |
|---|---|---|---|
| After merging characteristics with changed properties they will | |||
 | get a new number | Specifies that the stamp number is adopted when merging a characteristic. |  |
| | keep the same umber | Specifies that a characteristic will be stamped with a new stamp number when merged. |  |
“Transfer of manually inserted characteristics during drawing comparison” group
Note The setting was moved to the page Comparison with program version 4.2.0.
| Option | Function | Default setting | |
|---|---|---|---|
| | Do not transfer automatically | Specifies that manually inserted characteristics are not transferred automatically during drawing comparison. |  |
| | Transfer automatically | Specifies that manually inserted characteristics are transferred automatically during drawing comparison. |  |
en/infra-convert/user/config/stamps.txt · Last modified: 2023/07/23 12:04 by me
