infra CONVERT
blue DAT • infra DAT
mdm TOOL
Sidebar
en:infra-convert:user:config:export
Export
Available in
program version 1.1.5 and onwards
In the “Stamp” tab in the “Export” menu, you can alter the default stamp settings. Applied settings can be confirmed with OK or Apply, or discarded with Cancel.
Access function
The menu can be accessed as followed:
Menu bar
Click on Edit and Settings in the drop-down menu that opens. This will open the “Settings” menu window. Select the Export tab in the list on the left-hand side of the window.
“Excel test plan” group
| Option | Function | Default setting | |
|---|---|---|---|
 | Folder for Excel test plan templates | Set the directory path to load the templates from for the test plan export to Excel. | %ProgramData%\ELIAS GmbH\infra-convert\ExcelReports |
| Decimal separator for nominal values and tolerances | Note The settings for decimal separators are no longer required from programme version 2.5.3. Nominal value and tolerance values are exported as numbers in a data format that is interpreted correctly in Excel regardless of the decimal separator setting. | ||
 | Always use a dot. | Nominal sizes and tolerance values are always output with a dot as the decimal separator. |  |
| | Always use a comma. | Nominal sizes and tolerance values are always output with a comma as the decimal separator. | |
| | Depends on thge current systems' culture. | Nominal sizes and tolerance values are output with the decimal separator, which is stored in the settings of the operatin system. |  |
 | Use Microsoft Excel for the export process. | Specifies that an installed Microsoft Excel should be used to write the Excel file. Note Available from programme version 2.4.6. |  |
| | Transfer to Microsoft Excel without saving | Specifies that no Excel file is created during export. Instead, Microsoft Excel is opened to display the export result. Note Available from program version 3.1.0. |  |
| | Open Microsoft Excel after the export process | Specifies that the exported Excel file is opened after export. This setting is also available in the export dialogue window. Note Available from programme version 2.4.6. | |
“CSV export” group
| Option | Function | Default setting | |
|---|---|---|---|
| | Export an additional title line when performing a CSV export. | Determines that a title line will be exported when performing a CSV export. You will have the option to enter values for the title line during the export process. | |
| | Export as UTF-8 with special characters | Use the UTF-8 character set instead of the ANSI character set. | |
“Export in ASCII transfer format” group
Note Available from program version 4.1.0.
| Option | Function | Preset | |
|---|---|---|---|
| | Use UTF-8 character set | Use the UTF-8 character set instead of the ANSI character set. The UTF-8 character set is provided in the AQDEF standard. | |
“Drawing graphic format” group
| Option | Function | Default setting | |
|---|---|---|---|
 | Format | Determines the file format in which the stamped drawing is to be exported. Note We recommend the PNG and TIF formats, especially the JPG format is not suitable for technical drawings. | PNG |
| | Colour depth | Determines the pixel colour depth. A larger value will increase the size of the file. Note You can set 24 bit and 8 bit, for GIF only 8 bit. Antialiasing is only possible with a color depth of 24 bits, so it cannot be used for GIF. If antialiasing is used, a lower resolution (width × height) is required. (Antialiasing is available from program version 1.5.2.0.) | 24 |
 | Width | Determines the width of the image in pixels. | 4096 |
| | Height | Determines the height of the image in pixels. | 3072 |
| | Antialiasing | Specifies the →antialiasing method to be used. Note Recommendations can be found under “More > Terms > Antialiasing”. Antialiasing can only be applied at a colour depth of 24 bit and not for GIF. Note Available from program version 2.2.6 | Linear |
| | Quality level | Specifies the quality factor for →antialiasing. Note Recommendations can be found under “More > Terms > Antialiasing”. Antialiasing can only be applied at a colour depth of 24 bit and not for GIF. Note Available from program version 2.2.6 | 2 |
| | Method | Specifies whether the software-based or hardware-accelerated renderer should be used, or whether the most appropriate renderer should be selected automatically. Note Edge smoothing can be switched on and off. The methods available for selection (Linear, Average, …) are only taken into account during software rendering. In addition, only quality levels 2 and 3 are used; set levels 4 and 5 are interpreted as 3. Note Available from program version 4.2.12 | Automatic |
| | Export drawing graphic when saving | Determines that the drawing sheets are to be exported when a project is saved. | |
| Drawing graphic options | |||
| | drawing graphic with stamps | The drawing will be issued with stamps. | |
| | drawing graphic without stamps | The drawing will be issued without stamps. | |
“Stamp graphic format” group
| Option | Function | Default setting | |
|---|---|---|---|
| | Format | Determines the file format in which the stamp graphic is to be exported. Note We recommend the PNG and TIF formats, especially the JPG format is not suitable for technical drawings. | PNG |
| | Colour depth | Determines the pixel colour depth. A larger value will increase the size of the file. Note You can set 24 bit and 8 bit, for GIF only 8 bit. Antialiasing is only possible with a color depth of 24 bits, so it cannot be used for GIF. If antialiasing is used, a lower resolution (width × height) is required. (Antialiasing is available from program version 1.5.2.0.) | 24 |
| | Width | Determines the width of the image in pixels. | 1800 |
| | Height | Determines the height of the image in pixels. | 1200 |
| | Antialiasing | Specifies the →antialiasing method to be used. Note Recommendations can be found under “More > Terms > Antialiasing”. Antialiasing can only be applied at a colour depth of 24 bit and not for GIF. Note Available from program version 2.2.6 | Linear |
| | Quality level | Specifies the quality factor for →antialiasing. Note Recommendations can be found under “More > Terms > Antialiasing”. Antialiasing can only be applied at a colour depth of 24 bit and not for GIF. Note Available from program version 2.2.6 | 2 |
| | Method | Specifies whether the software-based or hardware-accelerated renderer should be used, or whether the most appropriate renderer should be selected automatically. Note Edge smoothing can be switched on and off. The methods available for selection (Linear, Average, …) are only taken into account during software rendering. In addition, only quality levels 2 and 3 are used; set levels 4 and 5 are interpreted as 3. Note Available from program version 4.2.12 | Automatic |
| | Export stamp graphics when saving. | Determines that the stamp graphics are to be exported when a project is saved. | |
| Naming of stamp graphics | |||
| | With the GUID of the stamp. | Sets the stamp graphics to be named with the GUID of the stamp. Note Available from program version 2.5.0 | |
| | Composed of inspection plan title, version and stamp text | Specifies that the name of the stamp graphics is built up from the test plan title, version and stamp text. Note Available from program version 2.5.0 | |
en/infra-convert/user/config/export.txt · Last modified: 2024/05/30 11:43 by me
