Parameter file "Settings"
All the basic settings (“Settings” Menu in the program) are stored in the parameter file “settings.json”. A superior description of how to use the parameter file is described under “Introduction > Overview (program version 2)” respectively “Introduction > Overview (program version 1)”.
During installation, the “settings” parameter file is saved at the following location:
%ProgramData%\ELIAS GmbH\infra-convert\settings.json
If another parameter file is to be loaded when starting the program, this can be specified in the startup parameter file (see “Configuration and Import > Settings”).
Important If the parameter file is faulty, this can lead to a program crash. Please only change designated parameters (). Please do not delete parameters marked with
and do not change values assigned to them.
Administrator tools
Export file with default values
You can export a complete “settings.json” with default settings from the infra CONVERT user interface in administrator mode. (Available from program version 2.2.3)
Siehe User Manual > Settings > Setup > Administration > “Export configuration files” group.
Set-up
The settings are written in fields with the structure shown here.
From program version 2.0.0.0 applies:
"Culture": { "Value": "de", },
| Parameter | Type | Value/Content | |
|---|---|---|---|
| Value | – | Value of the setting |  |
For older program versions applies:
"Culture": { "Name": "Culture", "Value": "de", "DefaultValue": "de", "ValueType": "System.Globalization.CultureInfo, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089", "IsTempSetting": false },
| Parameter | Type | Value/Content | |
|---|---|---|---|
| Name | String | Name of the setting; always includes the field name. |  |
| Value | – | Value of the setting | |
| DefaultValue | – | Factory-set value | |
| ValueType | String | Internal parameters, including data type and program library to be used. | |
| IsTempSetting | Boolean | Internal parameter. | |
List of the settings
The following table lists the values for the setting parameters and links to detailed descriptions.
“Settings > General” menu
| Name | Value | Link |
|---|---|---|
| View | ||
| CadViewBackgroundColor | Background colour in HTML colour code | User manual > Settings > Settings > General > “Display” group |
| MonochromeModeEnabled | Monochrome moen: true on false off | User manual > Settings > Settings > General > “Display” group |
| RenderType | Display method: DirectX DirectX renderer for best performance and full feature set GDI GDI compatibility mode renderer Note Available from program version 4.2.5. | User manual > Settings > Settings > General > “Display” group |
| GraphicsAdapter | Graphics adapter -1 Auto 0 bis n Number (assigned by the system) Note Available from program version 4.2.7. | User manual > Settings > Settings > General > “Display” group |
| MultisamplingLevel | Improve image quality by antialiasing: 16 Level: 16 8 Level: 8 4 Level: 4 2 Level: 2 0 Off | User manual > Settings > Settings > General > “Display” group |
| UseMipmappingForPaletteImages | Improve display of raster graphics through Mipmapping: true on false off | User manual > Settings > Settings > General > “Display” group |
| Language | ||
| Culture | Language: de German en English fr French it Italian es Spanish zh Chinese cs Czech bg Bulgarian Note Czech is available from program version 4.2.7, Bulgarian from 4.3.0. | User manual > Settings > Settings > General > “Language” Group > Table |
| Projects | ||
| DefaultProjectFolder | File path to default project folder | User manual > Settings > Settings > General > “Project” group |
| ProjectTemplatesPath | File path to the default project template folder Note Available only in the Pro version and from program version 3.2.0. | User manual > Settings > Settings > General > “Project” group |
| AllowDuplicateInspectionPlanVersions | Allow duplicate titles for each quality control plan and version: true on false off | User manual > Settings > Settings > General > “Project” group |
| AllowTestPlanVersionsNumberChange | The quality control plan version can be changed by the user: true on false off | User manual > Settings > Settings > General > “Project” group |
| AutosaveEnabled | Save project automatically: true on false off | User manual > Settings > Settings > General > “Project” group |
| AutosaveInterval | Time interval for automatic saving of the project in minutes (format: integer) | User manual > Settings > Settings > General > “Project” group |
| ProjectBackupEnabled | Automatically create backups of projects: true on false off Note Available from program version 4.4.0 | User manual > Settings > Settings > General > “Project” group |
| ProjectBackupInterval | Time interval for the automatic creation of backups in minutes (format: Integer) Note Available from program version 4.4.0 | User manual > Settings > Settings > General > “Project” group |
| ProjectBackupCount | Maximum number of backups per project (format: integer) Note Available from program version 4.4.0 | User manual > Settings > Settings > General > “Project” group |
| License server | ||
| LicenseServerUrl | Network address of the licence service (host and port as URL) | Settings > Settings > General > “License server” group |
| ActiveUserSessionsVisible | Display users in license dialog Note Available from program version 2.4.11. | Settings > Settings > General > “License server” group |
“Settings > Characteristics” menu
| Name | Value | Link |
|---|---|---|
| Common | ||
| AllowMultipleCharacteristicTags | Characteristic may have multiple tags: true Apply label false Reset label | User manual > Settings > Settings > Characteristics > "Common" group |
| ConfirmCharacteristicDelete | Ask before deleting characteristics: true Yes false No | User manual > Settings > Settings > Characteristics > "Common" group |
| Stamp number | ||
| DefaultStampStartValue | Initial value Info Observe permitted range of values! | User manual > Settings > Settings > Characteristic > “Stamp number” group |
| DefaultStampIncrementSetting | Increment Info Observe permitted range of values! | User manual > Settings > Settings > Characteristic > “Stamp number” group |
| MinimumStampNumberDigits | Minimum number of digits 0 Do not specify a minimum number 1 to 10 Number of digits Note Available as of programme version 2.6.1 | User manual > Settings > Settings > Characteristic > “Stamp number” group |
| Characteristic title | ||
| TitlePattern | Format title of variable characteristics | User manual > Settings > Settings > Characteristics > "Format characteristic title" group |
| TitlePatternAttributive | Format title of attributive characteristics | User manual > Settings > Settings > Characteristics > "Format characteristic title" group |
| TitlePatternMappings | Format feature title per class. List with assignment of class name (FriendlyName) and pattern Note Available as of programme version 4.0.4 | User manual > Settings > Settings > Characteristics > "Format characteristic title" group |
| Numberical precision | ||
| SignificantDigitsDefault | Converted results (Degree, Minute, Second to decimal) and calculations (Tolerance value as a fraction of the nominal value) are rounded to … significant digits | More > Terms > Numerical precision Settings > Settings > Characteristics > “Numerical precision” group |
| SignificantDigitsOne | Converted results (Degree, Minute, Second to decimal) and calculations (Tolerance value as a fraction of the nominal value) are rounded to … significant digits if the first relevant digit is a '1'. | More > Terms > Numerical precision Settings > Settings > Characteristics > “Numerical precision” group |
| Number format | ||
| CharacteristicCreateWithMinimumDecimalPlaces | Create numerical values with at least n decimal places 0 Do not specify a minimum number 1 to n Number of digits | Settings > Settings > Characteristic > “Number format” group |
| CharacteristicCreateAnglesDecimal | Convert angles to decimal values on creation. true Yes false No Note Available from program version 4.3.0 | Settings > Settings > Characteristic > “Number format” group |
| Attributive characteristics | ||
| CharacteristicInfotextCharacteristic | Word specifications are SingleSelection ignored in multiselection mode Always always created Never always ignored | User manual > Settings > Settings > Characteristics > “Word specifications” group |
| CharacteristicAttributiveCharacteristic | Other attributive characteristics are SingleSelection ignored in Number of jobsmultiselection mode Always always created Never always ignored | User manual > Settings > Settings > Characteristics > “Attributive characteristic” group |
| Variable characteristics | ||
| CharacteristicDimensionNominalValueNull | Characteristics with nominal value of zero are SingleSelection ignored in multiselection mode Always always created Never always ignored | User manual > Settings > Settings > Characteristics > “Variable characteristics” group |
| CharacteristicAuxiliaryDimension | Auxiliary dimensions are SingleSelection ignored in multiselection mode Always always created Never always ignored | User manual > Settings > Settings > Characteristics > “Variable characteristics” group |
| CharacteristicAuxiliaryDimensionUseTolerance | Auxiliary dimensions: use tolerances: true Yes false No | User manual > Settings > Settings > Characteristics > “Variable characteristics” group |
| CharacteristicTheoreticDimension | Theoretically precise measurements are SingleSelection ignored in multiselection mode Always always created Never always ignored | User manual > Settings > Settings > Characteristics > “Variable characteristics” group |
| CharacteristicTheoreticDimensionUseTolerace | Theoretically precise measurements: use tolerances: true Yes false No | User manual > Settings > Settings > Characteristics > “Variable characteristics” group |
| CharacteristicRoughDimension | Raw dimensions are SingleSelection ignored in multiselection mode Always always created Never always ignored Note Available from program version 4.3.0 | User manual > Settings > Settings > Characteristics > “Variable Characteristics” group |
| CharacteristicRoughDimensionUseTolerance | Raw dimensions: use tolerances: true Yes false No Note Available from program version 4.3.0 | User manual > Settings > Settings > Characteristics > “Variable Characteristics” group |
| CharacteristicControlDimension | Control dimensions are SingleSelection ignored in multiselection mode Always always created Never always ignored Note Available from program version 4.3.0 | User manual > Settings > Settings > Characteristics > “Variable Characteristics” group |
| CharacteristicDimensionWithoutTolerance | Characteristics from dimensions without tolerance entry directly at nominal value are SingleSelection ignored in multiselection mode Always always created Never always ignored | User manual > Settings > Settings > Characteristics > “Variable characteristics” group |
| CharacteristicVariableCharacteristic | Other variabel characteristics: Always always created Never always ignored | User manual > Settings > Settings > Characteristics > “Variable characteristics” group |
| CharacteristicVarSetMissingNull | Set unspecified dimension as value 0: true Yes false No Note Available from program version 4.1.4 | User manual > Settings > Settings > Characteristics > “Variable characteristics” group |
| Limit values in one direction (min., max.) | ||
| CharacteristicMinMax | Limit values in one direction (min./max.): The following applies from program version 1.2.0.26 upwards: WithoutTolerance Create limit value as nominal value WithOneTolerance Create nominal value with upper or lower tolerance WithBothTolerances Create nominal value and limit value as tolerances OnlyOneTolerance Create limit value only Never Ignore supplementary 'min./max.' information The following applies up to the above program version: WithoutTolerance Create without tolerances WithOneTolerance Create with upper or lower tolerance WithBothTolerances Create with nominal value and tolerance OnlyOneTolerance Create with one tolerance and nominal value of zero Never Always ignore | User manual > Settings > Settings > Characteristics > “Limit values in one direction (min., max.)” group |
| CharacteristicMinMaxNullTolerance | Limit value in one direction (min./max.): zero values are not applied in characteristic: true Yes false No | User manual > Settings > Settings > Characteristics > “Limit values in one direction (min., max.)” group |
| Angular measurements | ||
| CharacteristicAngleDimensions | Create angle dimensions as true variable characteristic false attributive characteristic | User manual > Settings > Settings > Characteristics > “Angular measurements” group |
| Dimensions with details of repetitions | ||
| MultiCharacteristicSplitt | Create individual characteristics from dimensions, indicating repetitions: true Yes false No | User manual > Settings > Settings > Characteristics > “Dimensions with details of repetitions” group |
| Geometric tolerances | ||
| CharacteristicGeometricDimensioningTolerancing | Processing the shape and positional tolerances: Nominal Nominal value = width of the tolerance zone; Upper tol. = 0; Lower tol. = 0 NominalWithLower Nominal value = width of the tolerance zone; Upper tol. = 0; Lower tol. = (-1) x width of the tolerance zone Upper Nominal value = 0; Upper tol. = width of the tolerance zone; Lower tol. = 0 NominalWithUpper Nominal value = width of the tolerance zone; Upper tol. = width of the tolerance zone; Lower tol. = 0 SplitToUpperAndLower Nominal value = 0; Upper tol. = (+0,5) x width of the tolerance zone; Lower tol. = (-0,5) x width of the tolerance zone Note SplitToUpperAndLower available from program version 4.4.5 | User manual > Settings > Settings > Characteristics > “Shape and positional tolerances” group |
| CharacteristictGdtNullTolerance | Shape and positional tolerances: zero values are not applied in the characteristic: true Yes false No | Settings > Settings > Characteristics> “Shape and positional tolerances” group |
| Radii | ||
| CharacteristicRadiusEnable | Define radius as true “Radius” class false ”Curve” class | User manual > Settings > Settings > “Radii” group |
| CharacteristicUseRoundnesOrLeghtTolerance | Radius measurement: general tolerances applied: true Table for curves and chamfers false Table for linear measures | User manual > Settings > Settings > Characteristics > “Radii” group |
| Chamfers | ||
| CharacteristicChamferVariable | Create chamfer as true variable characteristic false attributive characteristic | User manual > Settings > Settings > Characteristics > “Chamfers” group |
| Edges with indeterminate shape | ||
| CharacteristicChamferEdges | Edges with indeterminate shape: if no nominal value is defined, nominal value = 0: true Yes false No | User manual > Settings > Settings > Characteristics > “Edges with indeterminate shape" group |
| CharacteristicChamferEdgesSetMissingNull | Value of the not indicated limit: true Yes false No Note Available as of programme version 4.1.9 | User manual > Settings > Settings > Characteristics > “Edges with indeterminate shape" group |
| Surface parameters | ||
| CharacteristicRoughness | Surface parameters: Nominal Nominal value = limit value; Upper tol. = 0; Lower tol. = 0 NominalWithLower Nominal value = limit value; Upper tol. = 0; Lower tol. = (-1) x limit value OnlyOneTolerance Nominal value = 0; Upper tol. = nominal value; Lower tol. = 0 NominalWithUpper Nominal value = limit value; Upper tol. = limit value; Lower tol. = 0 | User manual > Settings > Settings > Characteristics > “Surface parameters” group |
| CharacteristicRoughnessNullTolerance | Surface parameters: zero values are not applied in the characteristic: true Yes false No | User manual > Settings > Settings > Characteristics > “Surface parameters” group |
| Simplified indications | ||
| RoughnessDictionary | Simplified surface parameters: assignment of letter (Key) and numerical value (Value) | User manual > Settings > Settings > “Simplified surface specifications” group |
“Settings > Comparison” menu
| Name | Value | Verweis |
|---|---|---|
| Common | ||
| AllowCompareWithNewerVersions | Allow drawings to be compared with newer quality control plan versions or those with the same name: true on false off | User manual > Settings > Settings > Comparison > “Common” group |
| Numbering | ||
| MergedCharacteristicNumber | Labelling of stamp in Drawings Comparison: NewNumber Reset label KeepNumber Apply existing label | User manual > Settings > Settings > Comparison > “Numbering” group |
| Transfer of manually inserted characteristics | ||
| AutomaticTransfer | Transfer of manually inserted characteristics during drawing comparison: true Yes false No | User manual > Settings > Settings > Comparison > “Transfer manually inserted characteristics” group |
| Highlight changes (red-green comparison) | ||
| RedGreenColorPalette | Colors: List with two colors for added and removed elements: “#FF00FF00”, “#FFFF0000” Standard “#FFFDE725” “#FF440154” Custom (default) Note Available only in the Pro version and from program version 4.2.0. | User manual > Settings > Settings > Comparison > “Highlight Changes (Red-Green Comparison)” group |
| RedGreenVisualization | Type of display: Pencil Pencil Highlighter Highlighter Note Available only in the Pro version and from program version 4.2.0. | User manual > Settings > Settings > Comparison > “Highlight Changes (Red-Green Comparison)” group |
“Settings > Stamp” menu
| Name | Value | Link |
|---|---|---|
| DefaultStampStartValue | Initial value Info Observe permitted range of values! Note With program version 4.2.0 moved to the page Characteristic | User manual > Settings > Settings > Stamp > “Marking” group |
| DefaultStampIncrementSetting | Increment Info Observe permitted range of values! Note With program version 4.2.0 moved to the page Characteristic | User manual > Settings > Settings > Stamp > “Marking” group |
| MinimumStampNumberDigits | Minimum number of digits 0 Do not specify a minimum number 1 to 10 Number of digits Note With program version 4.2.0 moved to the page Characteristic | User manual > Settings > Settings > Stamp > “Marking” group |
| MergedCharacteristicNumber | Labelling of stamp in Drawings Comparison: NewNumber Reset label KeepNumber Apply existing label Note With program version 4.2.0 moved to the page Comparison | User manual > Settings > Settings > Stamp > "Marking of the stamps during drawing comparison" group |
| AutomaticTransfer | Transfer of manually inserted characteristics during drawing comparison: true Yes false No Note With program version 4.2.0 moved to the page Comparison | User manual > Settings > Settings > Stamp > "“Transfer of manually inserted characteristics during drawing comparison” group |
“Settings > Import” menu
| Name | Value | Link |
|---|---|---|
| Common | ||
| SuppressFontReplacementNotification | Suppress notifications for replaced fonts: true on false off | User manual > Settings > Import > “Font replacement” group |
| AutoExplodeNestedGeometry | Explode large groups of drawing elements automatically: true on false off | User manual > Settings > Import > “Font replacement” group |
| DXF and DWG drawing files | ||
| MultiLayoutDefaultImportSetting | Behaviour when importing DXF and DWG files: Ask Allways ask before import ImportModel Always import model space only ImportPaperSpaces Always import all sheets from paper space ImportAllLayouts Allways import all sheets | User manual > Settings > Settings > Import > “DXF and DWG drawing files” group |
| PDF drawing files | ||
| PdfDefaultImportSetting | Behaviour when importing multi-page PDF files: Ask Allways ask before import ImportAllPages Allways import all sheets | User manual > Settings > Settings > Import > “PDF drawing files” group |
| DefaultImportPdfAsRasterImage | Import PDF as raster graphics: true Yes false No | User manual > Settings > Settings > Import > “PDF drawing files” group |
| DefaultImportPdfAsRasterImageDpi | Resolution or dot density of the raster graphics to be generated, specified as a numerical value | User manual > Settings > Settings > Import > “PDF drawing files” group |
| DefaultImportPdfAsRasterImageColorDepth | Color depth of the raster graphics to be generated: 0 Color (24 Bit) 1 Color (8 Bit) 2 Grayscale (24 Bit) 3 Monochrome (1 Bit) | User manual > Settings > Settings > Import > “PDF drawing files” group |
| infra - CONVERT project files (*.icp) | ||
| RemoveInsignificantTrailingZeros | Remove trailing zeros after the decimal point: true on false off Note Available from program version 3.2.4. | User manual > Settings > Settings > Import > “infra - CONVERT project file (*.icp)“ group |
“Settings > Export” menu
| Name | Value | Link |
|---|---|---|
| Test plan in Excel format (*.xlsx, *.xlsm, *.xls) | ||
| ExcelReportsPath | Path to directory of template files for export of Excel quality control reports | User manual > Settings > Export > “Excel quality control plan” group |
| ExcelReportsDecimalSeperator | Decimal separator for nominal values and tolerances: Dot Always use a dot. Comma Always use a comma. Culture Depends on the courrent systems' culture. Note No longer used as of programme version 2.5.3. | User manual > Settings > Export > “Excel quality control plan” group |
| UseExcelForTableExport | Use Microsoft Excel for the export process: true Yes false No Note Available from programme version 2.5.4. | User manual > Settings > Export > “Excel quality control plan” group |
| TransferDirectlyToExcel | Quit without saving to Microsoft Excel: true Yes false No Note Available from program version 3.1.0. | User manual > Settings > Export > “Excel quality control plan” group |
| OpenExcelAfterExport | Open Microsoft Excel after the export process: true Yes false No Note Available from programme version 2.5.4. | User manual > Settings > Export > “Excel quality control plan” group |
| Test plan in CSV format (*.csv) | ||
| CsvExportHeaderRow | Export additional title row when exporting to a CSV file: true Yes false No | User manual > Settings > Export > “CSV export” group |
| CsvAllowSpecialCharacters | Use the UTF-8 character set for CSV export: true Yes false No | User manual > Settings > Export > “CSV export” group |
| Test plan in ASCII transfer format (*.dfd, *.dfq) | ||
| DfdFileAdvancedFormat | Use UTF-8 character set (AQDEF format): true Yes false No Note Available from program version 4.1.0. | User manual > Settings > Export > “Export in ASCII transfer format” group |
| Drawing graphics (*.jpg, *.png, *.bmp, *.tif, *.gif) | ||
| GraphicsExportDrawing | Drawing graphics, defined by the following parameters in “Value” field: Format Jpg File format “JPG” Png File format “PNG” Bmp File format “BMP” Tif File format “TIF” Gif File format “GIF” Encoding zero No value assigned (The parameter is not currently in use) LanguageCode zero No value assigned de Coding: English Path Path to directory that is opened directly when saving in File Explorer Prefix zero No value assigned (The parameter is not currently in use) DfdHeader zero No value assigned (The parameter is not currently in use) CsvHeader zero No value assigned (The parameter is not currently in use) ImageOptions └ Width Width of graphic in number of pixels └ Height Height of graphic in number of pixels └ Bit 8 Colour depth: 8 -bit 24 Colour depth: 24-bit └ SupersamplingFactor Quality level for supersampling: 2 to 5 Steps 2 to 5 └ SupersamplingAlgorithm Supersampling method: None Do not apply supersampling Box Average Bilinear Linear Bicubic Cubic Bspline B-Spline Catmullrom Catmull-Rom Lanczos3 Lanczos 3 └ Mode Choice between hardware and software rendering: Auto Automatic Hardware Hardware accelerated Software Software ColorOption WithColor Non-transparent background Mode Drawing Drawing graphic with stamps DrawingWithoutStamps Drawing graphic without stamps TemplatePath zero No value assigned (The parameter is not currently in use) Note Supersampling is available from program version 2.2.6, Render mode (Hardware, Software) is avaiable from program version 4.2.11 | User manual > Settings > Export > “Drawing graphic” group |
| ExportDrawingOnSave | Export drawing graphic when saving: true Yes false No | User manual > Settings > Export > “Drawing graphic” group |
| GraphicsExportStamps | Stamp graphics, defined by the following parameters in “Value” field: Format Jpg File format “JPG” Png File format “PNG” Bmp File format “BMP” Tif File format “TIF” Gif File format “GIF” Encoding zero No value assigned (The parameter is not currently in use) LanguageCode zero No value assigned de Coding: English Path Path to directory that is opened directly when saving in File Explorer Prefix zero No value assigned (The parameter is not currently in use) DfdHeader zero No value assigned (The parameter is not currently in use) CsvHeader zero No value assigned (The parameter is not currently in use) ImageOptions └ Width Width of graphic in number of pixels └ Height Height of graphic in number of pixels └ Bit 8 Colour depth: 8 -bit 24 Colour depth: 24-bit └ SupersamplingFactor Quality level for supersampling: 2 to 5 Steps 2 to 5 └ SupersamplingAlgorithm Supersampling method: None Do not apply supersampling Box Average Bilinear Linear Bicubic Cubic Bspline B-Spline Catmullrom Catmull-Rom Lanczos3 Lanczos 3 └ Mode Choice between hardware and software rendering: Auto Automatic Hardware Hardware accelerated Software Software ColorOption WithColor Non-transparent background Mode Stamps Drawing graphics each receive a stamp TemplatePath zero No value assigned (The parameter is not currently in use) Note Supersampling is available from program version 2.2.6, Render mode (Hardware, Software) is avaiable from program version 4.2.11 | User manual > Settings > Export > “Stamp graphics” group |
| Stamp graphics (*.jpg, *.png, *.bmp, *.tif, *.gif) | ||
| ExportStampsOnSave | Export stamp graphics when saving: true Yes false No | User manual > Settings > Export > “Stamp graphics” group |
| StampExportFilenamePattern | Naming of stamp graphics {GUID} With the GUID of the stamp {IPT}_{IPV}_{STAMPTXT} Composed of inspection plan title, version and stamp text Note Available from program version 2.5.0 | User manual > Settings > Export > “Stamp graphics” group |
“Settings > Annotations” menu
| Name | Value | Reference |
|---|---|---|
| AnnotationTemplates | Definitions for annotation templates: Value Ordered list of definitions. The definitions should be created only in the software Note Available from program version 3.5.0 | User manual > Settings > Settings > Annotation templates > Properties |
“Settings > Administration” menu
| Name | Value | Link |
|---|---|---|
| AnnotationsEnabled | Unlock the annotation function: true Accessible false Locked Note Available from program version 3.5.0 | User Manual > Settings > Settings > Administration > “Annotations” group |
| InspectionPlanVersionAttributes | Test plan attributes defined by the following parameters in the “Value” field: Key Freely definable key (allowed characters: a…z, A…Z, 0…9, _; the default keys must not be deleted!) Priority List position (value range standard key: 12 to 1; value range free key: ≤ -1 larger value = higher prioritized/positioned). LocalizedProperties Display name └ LocalizedKey Display text in the software └ LanguageCode … for the respective language: de German en English fr French it Italian es Spanish zh Chinese Note Available only in the Pro version and as of program version 2.10.0 | User manual > Settings > Settings > Administration > "Additional attributes for test plan versions" group |
“Project settings > Tolerance tables” menu
| Name | Value | Link |
|---|---|---|
| ToleranceTablePath | Path to the tolerance table directory | Administrator’s Guide > Configuration and Import > Tolerance tables |
| DefaultLengthToleranceTable | GUID of the standard tolerance table for length | User manual > Settings > Project settings > Tolerance tables > “Length measurements” group Administrator’s Guide > Configuration and Import > Tolerance tables > Id |
| DefaultLengthToleranceTableColumn | Name of default tolerance class/row for length | User manual > Settings > Project settings > Tolerance tables > “Length measurements” group Administrator’s Guide > Configuration and Import > Tolerance tables > Columns |
| DefaultAngleToleranceTable | GUID of default tolerance table for angle dimensions | User manual > Settings > Project settings > Tolerance tables > “Angular measurements” group Administrator’s Guide > Configuration and Import > Tolerance tables > Id |
| DefaultAngleToleranceTableColumn | Name of default tolerance class/row for angle dimensions Empty string Do not assign automatically¹ Note¹ Available from program version 4.2.7. | User manual > Settings > Project settings > Tolerance tables > “Angular measurements” group Administrator’s Guide > Configuration and Import > Tolerance tables > Columns |
| DefaultRoundnessToleranceTable | GUID of default tolerance table for curve radii and chamfers | User manual > Settings > Project settings > Tolerance tables > “Radius of curvature and chamfers” group Administrator’s Guide > Configuration and Import > Tolerance tables > Id |
| DefaultRoundnessToleranceTableColumn | Name of default tolerance table for curve radii and chamfers | User manual > Settings > Project settings > Tolerance tables > “Radius of curvature and chamfers” group Administrator’s Guide > Configuration and Import > Tolerance tables > Columns |
Settings with no control elements in user interfaces
| Name | Value | Link |
|---|---|---|
| StampPrefix | Value for “Prefix” entered in the Stamp-with-dialog | User Manual > Functions > Characteristics > Automatic stamping > Workflow User Manual > Functions > Characteristics > Manual stamping > Workflow |
| StampPostfix | Value for “Suffix” entered in the Stamp-with-dialog | User Manual > Functions > Characteristics > Automatic stamping > Workflow User Manual > Functions > Characteristics > Manual stamping > Workflow |
| ZoomFactor | Factor for the zoom with the mouse wheel. | User manual > Functions > View > Viewing tools |
| ZoomToolFactor | Factor for the zoom with a zoom-in/zoom-out tool. | User manual > Functions > View > Viewing tools |
| DisplayViewTools | Visibility of the view tools in the main toolbar: true folded out (all visible) false collapsed (only Show whole drawing sheet visible) Note Available as of programme version 2.8.0 | User interface > Main window > Toolbar > The “Viewing tools” group |
| NewCharDlgShowAdditionalSymbols | Visibility of the fold-out additional keyboard (More symbols) in the quick entry dialog true folded out (visible) false folded Note Available from program version 3.1.0 | Functions > Characteristics Manual stamp |
| | Path to the general program data directory %ProgramData% Attention Never completely worked. Passed as of program version 1.3.7.0 as start parameter forceConfigDir. | |
| PdfExportTextAsGeometry | Export text as geometry to PDF Note Available as of programme version 2.7.13 | Functions > Export > Export drawing > Workflow > PDF |
| DfdFileExtension | Select format of the exported file in ASCII transfer format: dfd DFD (*.dfd) dfq DFQ (*.dfq) Note Available from program version 3.4.8 | Functions > Export > Export test plan > Workflow: Export test plan version > Export test plan in ASCII transfer format |
| ExportAnnotations | Export annotations: true Yes false No Note Available from program version 3.5.0 | User Manual > Functions > Exportt > Export drawing User Manual > Functions > Export > Export stamp views |
| Filters | Definitions for saved filters: Value Ordered list of filters with name, filter criteria and setting as to whether a filter should be used for export. The definitions should only be created in the software Note Available from program version 4.3.0 | User Manual > User interface > Function windows > Edit filters |
| StampDialogShowToleranceTables | Tolerance table area in the stamp-with dialog: true unfolded false folded Note Available from program version 4.4.0 | User manual > Functions > Characteristics > Automatic stamping > The stamp-with-dialogue |
| StampDialogCollapsed | Stamp-with-dialog: true folded false unfolded Note | User manual > Functions > Characteristics > Automatic stamping > The stamp-with-dialogue |
| ToleranceTableShortcuts | Definitions for saved quick selection templates for tolerance tables: Value Ordered list of quick selection templates with assignment of tolerance table and tolerance class to the characteristic groups. The definitions should only be generated in the software Note Available from program version 4.4.0 | User manual > Functions > Characteristics > Automatic stamping > The stamp-with-dialogue |
In-program parameters
| Name | Value | Link |
|---|---|---|
| AfterLoadMacros | Functions that optimize drawings during loading | |
| AfterOpenMacros | Functions that optimize drawings when they are opened | |
| RecentFiles | Links to recently opened projects listed in the start window | User manual > Main window > Start window |
| RecentDocumentPath | Link to the directory from which files were last opened | |
| | No longer used | |
| | No longer used | |
| | No longer used | |
| NewCharDlgPosition | Last position of the quick entry dialog on the screen | Functions > Characteristics > Manually stamp |
Installation/Deinstallation
The following describes the process for deinstalling, reinstalling (installing after previous deinstallation) and installing (without previous deinstallation) infra CONVERT using the parameter file “settings.json”. Essential preconditions are: the file is at the location where it was installed, and has not been renamed.
See also Introduction > Overview (program version 2) > Installation/Uninstallation
Deinstallation
The file is neither deleted or changed.
Reinstallation
An existing file is not changed.
Installation
An existing file is not changed.